M200.git - Gitblit

			@@ -643,6 +643,7 @@
			if (measureBind.WorkPosition == "P1" && M141Config.StationCode == "S5" && detectResults.GetDefectDescList().Count == 0)
			{
			var defecttem1 = detectResults.SelectMany(u => u.AllNetResults).SelectMany(m => m.DetectDetails).Select(detail => detail.ClassName).ToList();

			LogAsync(DateTime.Now, EnumHelper.LogLevel.Detail, $"{products[0].SN} S3S5检测缺陷名称集合为{string.Join(",", defecttem1)}");

			var defecttem = detectResults.SelectMany(u => u.AllNetResults.SelectMany(m => m.DetectDetails)).Where(u => u.ClassName == M141Config.defectname).ToList();
			@@ -961,15 +962,11 @@
			LogAsync(DateTime.Now, EnumHelper.LogLevel.Action, $"产品{p.PID}_{p.SEQUENCE}工位{measureBind.WorkPosition}的第{measureBind.CheckIndex}检测完成，{msg}");
			}
			});



			}
			catch (Exception ex)
			{
			LogAsync(DateTime.Now, EnumHelper.LogLevel.Error, $"{measureBind.WorkPosition}，产品{string.Join(",", products.Select(u => u.PID))}的NG图片保存异常，{ex.GetExceptionMessage()}");
			}

			}
			});
			}
			@@ -1403,219 +1400,212 @@
			}
			_ct = DateTime.Now;

			if (M141Config.ISupMES && (M141Config.MESchannel == -1 \|\| M141Config.MESchannel == 1))
			{
			if (M141Config.numpro >= 50)
			{
			M141Config.numpro = 0;
			}
			//if (M141Config.ISupMES && (M141Config.MESchannel == -1 \|\| M141Config.MESchannel == 1))
			//{
			// if (M141Config.numpro >= 50)
			// {
			// M141Config.numpro = 0;
			// }

			string Msgreceice = null;
			// string Msgreceice = null;

			if (pList[0].Result == "OK")
			{
			M141Config.numpro++;
			Msgreceice = Task.Run(() => mqtt.MESForProduceAsync(pList[0], M141Config.mesnum2.ToString(), M141Config.numpro)).Result;
			}
			else
			{
			if (M141Config.ISupNG)
			{
			Msgreceice = Task.Run(() => mqtt.MESForProduceAsync(pList[0], M141Config.mesnum2.ToString(), M141Config.numpro)).Result;
			LogAsync(DateTime.Now, EnumHelper.LogLevel.Assist, $"产品{pList[0].PID}启动NG上传");
			// if (pList[0].Result == "OK")
			// {
			// //M141Config.numpro++;
			// //Msgreceice = Task.Run(() => mqtt.MESForProduceAsync(pList[0], M141Config.mesnum2.ToString(), M141Config.numpro)).Result;
			// LogAsync(DateTime.Now, EnumHelper.LogLevel.Assist, $"产品{pList[0].PID}汇总OK暂时不上传");
			// }
			// else
			// {
			// if (M141Config.ISupNG)
			// {
			// Msgreceice = Task.Run(() => mqtt.MESForProduceAsync(pList[0], M141Config.mesnum2.ToString(), M141Config.numpro)).Result;
			// LogAsync(DateTime.Now, EnumHelper.LogLevel.Assist, $"产品{pList[0].PID}启动NG上传");

			}
			else
			{
			LogAsync(DateTime.Now, EnumHelper.LogLevel.Assist, $"产品{pList[0].PID}关闭NG上传");
			}
			}
			M141Config.mesnum2++;
			if (Msgreceice == null && !M141Config.ISupNG)
			{
			if (!M141Config.ISupNG)
			{
			LogAsync(DateTime.Now, EnumHelper.LogLevel.Assist, $"产品{pList[0].PID}数据NG，开启关闭NG上传MES");
			}
			else
			{
			LogAsync(DateTime.Now, EnumHelper.LogLevel.Exception, $"产品{pList[0].PID}数据上传MES异常返回数据为null");
			}
			}
			else
			{
			try
			{
			var obj = JsonConvert.DeserializeObject<AutoLineMacBarcodeQueueBak>(Msgreceice);
			// }
			// else
			// {
			// LogAsync(DateTime.Now, EnumHelper.LogLevel.Assist, $"产品{pList[0].PID}关闭NG上传");
			// }
			// }
			// M141Config.mesnum2++;
			// if (Msgreceice == null && !M141Config.ISupNG)
			// {
			// if (!M141Config.ISupNG)
			// {
			// LogAsync(DateTime.Now, EnumHelper.LogLevel.Assist, $"产品{pList[0].PID}数据NG，开启关闭NG上传MES");
			// }
			// else
			// {
			// LogAsync(DateTime.Now, EnumHelper.LogLevel.Exception, $"产品{pList[0].PID}数据上传MES异常返回数据为null");
			// }
			// }
			// else
			// {
			// try
			// {
			// var obj = JsonConvert.DeserializeObject<AutoLineMacBarcodeQueueBak>(Msgreceice);

			if (obj.zstatus == "200")
			{
			LogAsync(DateTime.Now, EnumHelper.LogLevel.Assist, $"产品{pList[0].PID}数据上传MES成功 {Msgreceice}");
			// if (obj.zstatus == "200")
			// {
			// LogAsync(DateTime.Now, EnumHelper.LogLevel.Assist, $"产品{pList[0].PID}数据上传MES成功 {Msgreceice}");

			if (M141Config.Isprint && !string.IsNullOrEmpty(obj.tary_label))
			{
			StartPrint(obj.tary_label);
			}
			// if (M141Config.Isprint && !string.IsNullOrEmpty(obj.tary_label))
			// {
			// StartPrint(obj.tary_label, "Honeywell PX240S(300 dpi)");
			// }
			// }
			// else
			// {
			// LogAsync(DateTime.Now, EnumHelper.LogLevel.Exception, $"产品{pList[0].PID}数据上传MES失败 {Msgreceice}");
			// }
			// }
			// catch
			// {
			// LogAsync(DateTime.Now, EnumHelper.LogLevel.Exception, $"产品{pList[0].PID}数据上传MES异常 {Msgreceice}");
			// }
			// }

			// int numplca = Convert.ToInt32(pList[0].SEQUENCE.Split('_')[0]);
			// LogAsync(DateTime.Now, EnumHelper.LogLevel.Assist, $"plc给出的产品序号为{numplca}");

			// lock (plcnumlock)//1-29999
			// {

			}
			else
			{
			LogAsync(DateTime.Now, EnumHelper.LogLevel.Exception, $"产品{pList[0].PID}数据上传MES失败 {Msgreceice}");
			}
			}
			catch
			{
			LogAsync(DateTime.Now, EnumHelper.LogLevel.Exception, $"产品{pList[0].PID}数据上传MES异常 {Msgreceice}");
			}
			}
			// if (PlcNumForAll == -1)
			// {
			// PlcNumForAll = numplca;
			// }

			// int differ = numplca - PlcNumForAll;

			// LogAsync(DateTime.Now, EnumHelper.LogLevel.Assist, $"两个产品中间的差值differ为{differ}");

			int numplca = Convert.ToInt32(pList[0].SEQUENCE.Split('_')[0]);
			LogAsync(DateTime.Now, EnumHelper.LogLevel.Assist, $"plc给出的产品序号为{numplca}");
			// if (differ > 1)
			// {
			// for (int i = PlcNumForAll + 1; i < numplca; i++)
			// {
			// try
			// {
			// var plist = mysqlhelper.GetProductList(i + "_1");
			// ProductModel newp = new ProductModel();
			// newp.SEQUENCE = plist[0].SEQUENCE;
			// newp.PID = plist[0].PID;
			// newp.BasketCode = plist[0].BasketCode;
			// newp.Zword = plist[0].Zword;
			// newp.Result = "NG";
			// newp.SN = plist[0].SN;

			lock (plcnumlock)//1-29999
			{
			// if (M141Config.IsfinDevice)
			// {
			// SummaryAllprodata(newp);
			// LogAsync(DateTime.Now, EnumHelper.LogLevel.Assist, $"产品{newp.PID}提前NG加入汇总数据报表统计");
			// }
			// if (M141Config.ISupNG)
			// {
			// var tems = Task.Run(() => mqtt.MESForProduceAsync(newp, M141Config.mesnum2.ToString(), M141Config.numpro)).Result;
			// M141Config.mesnum2++;
			// LogAsync(DateTime.Now, EnumHelper.LogLevel.Assist, $"产品{newp.PID}启动NG上传");
			// }
			// else
			// {
			// LogAsync(DateTime.Now, EnumHelper.LogLevel.Assist, $"产品{newp.PID}关闭NG上传");
			// }

			if (PlcNumForAll == -1)
			{
			PlcNumForAll = numplca;
			}
			// }
			// catch
			// {
			// LogAsync(DateTime.Now, EnumHelper.LogLevel.Assist, $"产品{i + "_1"}上传失败");
			// }
			// }
			// }
			// else if (differ == -29998 && differ == 1 && differ == 0)
			// {
			// LogAsync(DateTime.Now, EnumHelper.LogLevel.Assist, $"生产过程中未失去产品");
			// }
			// else if (differ < 0 && differ > -29998)
			// {
			// LogAsync(DateTime.Now, EnumHelper.LogLevel.Assist, $"PlcNumForAll为{PlcNumForAll}，numplca为{numplca}");
			// //产品从新计数时
			// for (int i = PlcNumForAll + 1; i <= 29999; i++)
			// {
			// try
			// {
			// var plist = mysqlhelper.GetProductList(i + "_1");
			// ProductModel newp = new ProductModel();
			// newp.SEQUENCE = plist[0].SEQUENCE;
			// newp.PID = plist[0].PID;
			// newp.Zword = plist[0].Zword;
			// newp.BasketCode = plist[0].BasketCode;
			// newp.Result = "NG";
			// newp.SN = plist[0].SN;
			// if (M141Config.IsfinDevice)
			// {
			// SummaryAllprodata(newp);
			// LogAsync(DateTime.Now, EnumHelper.LogLevel.Assist, $"产品{newp.PID}提前NG加入汇总数据报表统计");
			// }
			// if (M141Config.ISupNG)
			// {
			// var tems = Task.Run(() => mqtt.MESForProduceAsync(newp, M141Config.mesnum2.ToString(), M141Config.numpro)).Result;
			// M141Config.mesnum2++;
			// LogAsync(DateTime.Now, EnumHelper.LogLevel.Assist, $"产品{newp.PID}启动NG上传");
			// }
			// else
			// {
			// LogAsync(DateTime.Now, EnumHelper.LogLevel.Assist, $"产品{newp.PID}关闭NG上传");
			// }

			int differ = numplca - PlcNumForAll;
			// }
			// catch
			// {

			LogAsync(DateTime.Now, EnumHelper.LogLevel.Assist, $"两个产品中间的差值differ为{differ}");
			// }
			// }
			// for (int i = 1; i < numplca; i++)
			// {
			// try
			// {
			// var plist = mysqlhelper.GetProductList(i + "_1");
			// ProductModel newp = new ProductModel();
			// newp.SEQUENCE = plist[0].SEQUENCE;
			// newp.PID = plist[0].PID;
			// newp.BasketCode = plist[0].BasketCode;
			// newp.Zword = plist[0].Zword;
			// newp.Result = "NG";
			// newp.SN = plist[0].SN;
			// if (M141Config.IsfinDevice)
			// {
			// SummaryAllprodata(newp);
			// LogAsync(DateTime.Now, EnumHelper.LogLevel.Assist, $"产品{newp.PID}提前NG加入汇总数据报表统计");
			// }
			// if (M141Config.ISupNG)
			// {
			// var tems = Task.Run(() => mqtt.MESForProduceAsync(newp, M141Config.mesnum2.ToString(), M141Config.numpro)).Result;
			// M141Config.mesnum2++;
			// LogAsync(DateTime.Now, EnumHelper.LogLevel.Assist, $"产品{newp.PID}启动NG上传");
			// }
			// else
			// {
			// LogAsync(DateTime.Now, EnumHelper.LogLevel.Assist, $"产品{newp.PID}关闭NG上传");
			// }

			if (differ > 1)
			{
			for (int i = PlcNumForAll + 1; i < numplca; i++)
			{
			try
			{
			var plist = mysqlhelper.GetProductList(i + "_1");
			ProductModel newp = new ProductModel();
			newp.SEQUENCE = plist[0].SEQUENCE;
			newp.PID = plist[0].PID;
			newp.BasketCode = plist[0].BasketCode;
			newp.Zword = plist[0].Zword;
			newp.Result = "NG";
			newp.SN = plist[0].SN;
			// //var tems = Task.Run(() => mqtt.MESForProduceAsync(newp, M141Config.mesnum2.ToString(), M141Config.numpro)).Result;
			// //M141Config.mesnum2++;
			// //LogAsync(DateTime.Now, EnumHelper.LogLevel.Assist, $"numplca，前站NG排料且plc触发清零产品{newp.PID}数据上传,结果为{newp.Result}");
			// }
			// catch
			// {
			// }
			// }
			// }
			// PlcNumForAll = numplca;
			// }

			if (M141Config.IsfinDevice)
			{
			SummaryAllprodata(newp);
			LogAsync(DateTime.Now, EnumHelper.LogLevel.Assist, $"产品{newp.PID}提前NG加入汇总数据报表统计");
			}
			if (M141Config.ISupNG)
			{
			var tems = Task.Run(() => mqtt.MESForProduceAsync(newp, M141Config.mesnum2.ToString(), M141Config.numpro)).Result;
			M141Config.mesnum2++;
			LogAsync(DateTime.Now, EnumHelper.LogLevel.Assist, $"产品{newp.PID}启动NG上传");
			}
			else
			{
			LogAsync(DateTime.Now, EnumHelper.LogLevel.Assist, $"产品{newp.PID}关闭NG上传");
			}

			}
			catch
			{
			LogAsync(DateTime.Now, EnumHelper.LogLevel.Assist, $"产品{i + "_1"}上传失败");
			}
			}
			}
			else if (differ == -29998 && differ == 1 && differ == 0)
			{
			LogAsync(DateTime.Now, EnumHelper.LogLevel.Assist, $"生产过程中未失去产品");
			}
			else if (differ < 0 && differ > -29998)
			{
			LogAsync(DateTime.Now, EnumHelper.LogLevel.Assist, $"PlcNumForAll为{PlcNumForAll}，numplca为{numplca}");
			//产品从新计数时
			for (int i = PlcNumForAll + 1; i <= 29999; i++)
			{
			try
			{
			var plist = mysqlhelper.GetProductList(i + "_1");
			ProductModel newp = new ProductModel();
			newp.SEQUENCE = plist[0].SEQUENCE;
			newp.PID = plist[0].PID;
			newp.Zword = plist[0].Zword;
			newp.BasketCode = plist[0].BasketCode;
			newp.Result = "NG";
			newp.SN = plist[0].SN;
			if (M141Config.IsfinDevice)
			{
			SummaryAllprodata(newp);
			LogAsync(DateTime.Now, EnumHelper.LogLevel.Assist, $"产品{newp.PID}提前NG加入汇总数据报表统计");
			}
			if (M141Config.ISupNG)
			{
			var tems = Task.Run(() => mqtt.MESForProduceAsync(newp, M141Config.mesnum2.ToString(), M141Config.numpro)).Result;
			M141Config.mesnum2++;
			LogAsync(DateTime.Now, EnumHelper.LogLevel.Assist, $"产品{newp.PID}启动NG上传");
			}
			else
			{
			LogAsync(DateTime.Now, EnumHelper.LogLevel.Assist, $"产品{newp.PID}关闭NG上传");
			}
			//var tems = Task.Run(() => mqtt.MESForProduceAsync(newp, M141Config.mesnum2.ToString(), M141Config.numpro)).Result;
			//M141Config.mesnum2++;
			//LogAsync(DateTime.Now, EnumHelper.LogLevel.Assist, $"PlcNumForAll，前站NG排料且plc触发清零产品{newp.PID}数据上传,结果为{newp.Result}");

			}
			catch
			{

			}
			}
			for (int i = 1; i < numplca; i++)
			{
			try
			{
			var plist = mysqlhelper.GetProductList(i + "_1");
			ProductModel newp = new ProductModel();
			newp.SEQUENCE = plist[0].SEQUENCE;
			newp.PID = plist[0].PID;
			newp.BasketCode = plist[0].BasketCode;
			newp.Zword = plist[0].Zword;
			newp.Result = "NG";
			newp.SN = plist[0].SN;
			if (M141Config.IsfinDevice)
			{
			SummaryAllprodata(newp);
			LogAsync(DateTime.Now, EnumHelper.LogLevel.Assist, $"产品{newp.PID}提前NG加入汇总数据报表统计");
			}
			if (M141Config.ISupNG)
			{
			var tems = Task.Run(() => mqtt.MESForProduceAsync(newp, M141Config.mesnum2.ToString(), M141Config.numpro)).Result;
			M141Config.mesnum2++;
			LogAsync(DateTime.Now, EnumHelper.LogLevel.Assist, $"产品{newp.PID}启动NG上传");
			}
			else
			{
			LogAsync(DateTime.Now, EnumHelper.LogLevel.Assist, $"产品{newp.PID}关闭NG上传");
			}

			//var tems = Task.Run(() => mqtt.MESForProduceAsync(newp, M141Config.mesnum2.ToString(), M141Config.numpro)).Result;
			//M141Config.mesnum2++;
			//LogAsync(DateTime.Now, EnumHelper.LogLevel.Assist, $"numplca，前站NG排料且plc触发清零产品{newp.PID}数据上传,结果为{newp.Result}");
			}
			catch
			{
			}
			}
			}
			PlcNumForAll = numplca;
			}

			}
			else
			{
			LogAsync(DateTime.Now, EnumHelper.LogLevel.Information, $"已关闭mes连接或者数据上传接口");
			}
			//}
			//else
			//{
			// LogAsync(DateTime.Now, EnumHelper.LogLevel.Information, $"已关闭mes连接或者数据上传接口");
			//}
			}

			//ReplyPlcData(positionName, config.TriggerValue);
			@@ -1631,7 +1621,6 @@

			});
			}


			public void ReplyPlcData(WorkPositionSet p, List<bool> result)
			{
			@@ -1696,7 +1685,7 @@
			data += "NA,";
			}
			}
			CSVRecordAsync($"AllDeviceProductRecord.csv", data, Head);
			CSVRecordAsync($"AllDeviceProductRecord_{DateTime.Now.ToString("yyyyMMdd")}.csv", data, Head);

			}
			catch (Exception exx)
			@@ -1706,9 +1695,6 @@
			});

			}




			#endregion

			@@ -1894,27 +1880,29 @@
			PrintDocument printDocument1 = new PrintDocument();
			string Printmessage = "";

			public void StartPrint(string str)
			public void StartPrint(string str, string PrinterName)
			{
			try
			{
			LogAsync(DateTime.Now, EnumHelper.LogLevel.Action, $"打印机打印{str}");
			int ttwith = 240;
			int ttheigh = 80;
			Printmessage = str;

			this.printDocument1.DefaultPageSettings.PrinterSettings.PrinterName = "Honeywell PX240S (300 dpi)";
			this.printDocument1.DefaultPageSettings.PrinterSettings.PrinterName = PrinterName;
			this.printDocument1.DefaultPageSettings.PaperSize = new PaperSize("Custum", ttwith, ttheigh);

			this.printDocument1.PrintController = new System.Drawing.Printing.StandardPrintController();
			this.printDocument1.Print();

			}
			catch
			catch(Exception ex)
			{

			LogAsync(DateTime.Now, EnumHelper.LogLevel.Exception, $"打印机打印出错:{ex.ToString()}");
			}

			}



			//C229M2508250500002
			@@ -1965,11 +1953,6 @@


			#endregion






			}