1. 添加部分log信息 2. 修改部分机器人动作流程 3. 开放OperationConfig的InputData参数

patrick

2019-12-05 6428fad15dbe79e30a48ffc9aabe31e03a45426c

 src/A032.Process/ProcessControl_Method.cs

@@ -8,6 +8,7 @@
using HalconDotNet;
using System;
using System.Collections.Generic;
using System.ComponentModel;
using System.Drawing;
using System.IO;
using System.Linq;
@@ -19,9 +20,54 @@
{
    public partial class ProcessControl
    {
        const int WAITTIME = 5000;

        Dictionary<int, int> machineFullTrayDict = new Dictionary<int, int>();
        Dictionary<int, int> machineEmptyTrayDict = new Dictionary<int, int>();
        List<TaskAssignInfo> taskAssignedList = new List<TaskAssignInfo>();

        #region AGV事件
        private void OnAGVBatteryLvlChanged(SeerAGVDriver agv, float preBatteryLvl, float batteryLvl)
        {
            var bind = Config.AGVBindCollection.FirstOrDefault(u => u.AGVId == agv.Id);
            SeerAGVInitialConfig iConfig = agv.InitialConfig as SeerAGVInitialConfig;
            if (batteryLvl <= iConfig.BatteryLvlToCharge && preBatteryLvl > iConfig.BatteryLvlToCharge)
            {
                Task.Run(() =>
                {
                    var position = Config.PositionCollection.FirstOrDefault(u => u.Description == PathPositionDefinition.Charge);

                    if (position == null)
                    {
                        throw new ProcessException("未找到充电地点");
                    }

                    while (bind.UnitStatus != TaskStatus.Available)
                    {
                        if (bind.SetAGVStatus(TaskStatus.Running))
                        {
                            bind.AGV.TaskOrder(position.PositionCode);
                            break;
                        }

                        Thread.Sleep(WAITTIME);
                    }
                });

                return;
            }

            if (batteryLvl >= iConfig.BatteryLvlChargeDone && preBatteryLvl < iConfig.BatteryLvlChargeDone)
            {
                var position = Config.PositionCollection.FirstOrDefault(u => u.PositionCode == agv.CurrentPosition);

                if (position != null && position.Description == PathPositionDefinition.Charge)
                {
                    bind.SetAGVStatus(TaskStatus.Available);
                }
                return;
            }
        }

        private void OnAGVTaskStatusChanged(SeerAGVDriver agv, AGVTaskStatus taskStatus)
        {
@@ -41,7 +87,7 @@
                //    bind.RobotStatus = TaskStatus.Running;
                //}

                bind.AGVStatus = TaskStatus.Available;
                bind.SetAGVStatus(TaskStatus.Available);
            }
        }

@@ -63,9 +109,34 @@
                //    bind.RobotStatus = TaskStatus.Running;
                //}

                bind.AGVStatus = TaskStatus.Available;
                bind.SetAGVStatus(TaskStatus.Available);
                LogAsync(DateTime.Now, $"AGV到位{positionCode}", "");

                PathPosition position = Config.PositionCollection.FirstOrDefault(p => p.PositionCode == bind.AGVDest);
                switch (position.Description)
                {
                    case PathPositionDefinition.LoadEmptyTray:
                        LogAsync(DateTime.Now, $"AGV完成，准备上空Tray", "");
                        Robot_LoadEmptyTray(bind.Id, position);
                        break;
                    case PathPositionDefinition.LoadFullTray:
                        LogAsync(DateTime.Now, $"AGV完成，准备上满Tray", "");
                        Robot_LoadFullTraySnap(bind.Id, position);
                        break;
                    case PathPositionDefinition.UnloadEmptyTray:
                        LogAsync(DateTime.Now, $"AGV完成，准备下空Tray", "");
                        Robot_UnloadEmptyTraySnap(bind.Id, position);
                        break;
                    case PathPositionDefinition.UnloadFullTray:
                        LogAsync(DateTime.Now, $"AGV完成，准备下满Tray", "");
                        Robot_UnloadFullTraySnap(bind.Id, position);
                        break;
                    default:
                        break;
                }
            }
        }
        #endregion

        private void OnRobotMsgReceived(DateTime dt, AuboRobotDriver robot, RobotMsg msg)
        {
@@ -78,7 +149,7 @@
                throw new ProcessException("未能根据机器人信息获取绑定设备信息", null);
            }

            List<AGVTaskModel> models = new List<AGVTaskModel>();
            //List<AGVTaskModel> models = new List<AGVTaskModel>();

            switch (msg.Action)
            {
@@ -123,13 +194,20 @@

                                    if (machineEmptyTrayDict[msg.Para2] < Config.Machine_EmptyTrayNum)
                                    {
                                        bind.RobotIOHandle.Reset();
                                        bind.RobotIOHandle.WaitOne();
                                        //bind.RobotIOHandle.Reset();
                                        //bind.RobotIOHandle.WaitOne();
                                        bind.Robot.MonitorHandle.WaitOne();
                                        //bind.Robot.IOChangedHandle.WaitOne();
                                        Thread.Sleep((bind.Robot.InitialConfig as AuboRobotInitialConfig).ScanInterval);

                                        if (!bind.IsFullTrayFull)
                                        {
                                            RobotMsg_UnloadEmptyTray.Para2 = msg.Para2;
                                            robot.SendMsg(RobotMsg_UnloadEmptyTray, true);
                                        }
                                        else
                                        {
                                            bind.RobotStatus = TaskStatus.Available;
                                        }
                                    }
                                    else
@@ -142,12 +220,19 @@
                                {
                                    bind.CurrentFullTray = int.Parse(msg.Datas[1]);

                                    bind.RobotIOHandle.Reset();
                                    bind.RobotIOHandle.WaitOne();
                                    //bind.RobotIOHandle.Reset();
                                    //bind.RobotIOHandle.WaitOne();
                                    bind.Robot.MonitorHandle.WaitOne();
                                    //bind.Robot.IOChangedHandle.WaitOne();
                                    Thread.Sleep((bind.Robot.InitialConfig as AuboRobotInitialConfig).ScanInterval);

                                    if (!bind.IsFullTrayEmpty)
                                    {
                                        Camera_UnloadFullTray(robot.Id, msg.Para2);
                                    }
                                    else
                                    {
                                        bind.RobotStatus = TaskStatus.Available;
                                    }
                                }
                                break;
@@ -187,29 +272,34 @@
                    break;
                case RobotMsgAction.Calibration:
                    {
                        _calibReply.CalibIndex = int.Parse(msg.Datas[4]);
                        _calibReply.CalibPositionNo = msg.Para2;
                        _calibReply.RobotPosition = new CustomizedPoint(float.Parse(msg.Datas[0]), float.Parse(msg.Datas[1]));

                        _calibReply.CalibHandle.Set();
                    }
                    break;
                case RobotMsgAction.StandardPoint:
                    {

                        _calibReply.CalibPositionNo = msg.Para2;
                        _calibReply.CalibHandle.Set();
                    }
                    break;
                default:
                    break;
            }

            if (models.Count > 0)
            {
                models.ForEach(model =>
                {
                    if (!bind.TaskList.Any(t => t.MethodFunc.Method.Name == model.MethodFunc.Method.Name))
                    {
                        model.OpConfig = new AGVBindOpConfig(bind.Id);
                        bind.TaskList.Add(model);
                    }
                });
            }
            //if (models.Count > 0)
            //{
            //    models.ForEach(model =>
            //    {
            //        if (!bind.TaskList.Any(t => t.MethodName == model.MethodName))
            //        {
            //            model.OpConfig = new AGVBindOpConfig(bind.Id);
            //            bind.AddTask(model);
            //        }
            //    });
            //}
        }

        public void QueryRobotIO()
@@ -220,39 +310,40 @@
            });
        }

        private void OnBindUnitTaskInvoke(AGVBindUnit bind)
        {
            var task = bind.TaskList[0];
            var response = task.MethodFunc.Invoke(task.OpConfig, task.Device);
        }
        //private void OnBindUnitTaskInvoke(AGVTaskModel task)
        //{
        //    InvokeMethodDict[task.MethodName].Invoke(this, new object[] { task.OpConfig, task.Device });

        //    //var response = task.MethodFunc.Invoke(task.OpConfig, task.Device);
        //}

        #region Robot监听事件
        private void AddNewTaskToBind(string robotId, List<AGVTaskModel> models)
        {
            var bind = Config.AGVBindCollection.FirstOrDefault(u => u.RobotId == robotId);
        //private void AddNewTaskToBind(string robotId, List<AGVTaskModel> models)
        //{
        //    var bind = Config.AGVBindCollection.FirstOrDefault(u => u.RobotId == robotId);

            if (bind == null)
            {
                throw new ProcessException("未能根据机器人信息获取绑定设备信息", null);
            }
        //    if (bind == null)
        //    {
        //        throw new ProcessException("未能根据机器人信息获取绑定设备信息", null);
        //    }

            AddNewTaskToBind(bind, models);
        }
        //    AddNewTaskToBind(bind, models);
        //}

        private void AddNewTaskToBind(AGVBindUnit bind, List<AGVTaskModel> models)
        {
            if (models.Count > 0)
            {
                models.ForEach(model =>
                {
                    if (!bind.TaskList.Any(t => t.MethodFunc.Method.Name == model.MethodFunc.Method.Name))
                    {
                        model.OpConfig = new AGVBindOpConfig(bind.Id);
                        bind.TaskList.Add(model);
                    }
                });
            }
        }
        //private void AddNewTaskToBind(AGVBindUnit bind, List<AGVTaskModel> models)
        //{
        //    if (models.Count > 0)
        //    {
        //        models.ForEach(model =>
        //        {
        //            if (!bind.TaskList.Any(t => t.MethodName == model.MethodName))
        //            {
        //                model.OpConfig = new AGVBindOpConfig(bind.Id);
        //                bind.AddTask(model);
        //            }
        //        });
        //    }
        //}

        [ProcessMethod("", "Robot_Monitor_Alarm", "机器人监听事件-报警", true)]
        public ProcessResponse Robot_Monitor_Alarm(IOperationConfig config, IDevice device)
@@ -273,7 +364,7 @@
        [ProcessMethod("", "Robot_Monitor_EmptyTrayEmpty", "机器人监听事件-空Tray区域清空", true)]
        public ProcessResponse Robot_Monitor_EmptyTrayEmpty(IOperationConfig config, IDevice device)
        {
            bool isEmptyTrayEmpty = config.InputPara[0] == 1;
            bool isEmptyTrayEmpty = config.InputPara[0] == 0;
            var bind = Config.AGVBindCollection.FirstOrDefault(u => u.RobotId == device.Id);
            if (isEmptyTrayEmpty)
            {
@@ -281,36 +372,43 @@

                Task.Run(() =>
                {
                    Func<IOperationConfig, IDevice, ProcessResponse> action = AGV_LoadEmptyTray;
                    while (bind.IsEmptyTrayEmpty && bind.TaskList.Count == 0 && !bind.TaskList.Any(u => u.MethodFunc.Method.Name == action.Method.Name))
                    //Func<IOperationConfig, IDevice, ProcessResponse> action = AGV_LoadEmptyTray;
                    while (bind.IsEmptyTrayEmpty && !bind.IsEmptyTrayTaskAssigned)
                    {
                        if (bind.TaskList.Count == 0)
                        //if (bind.TaskList.Count == 0)
                        if (bind.UnitStatus == TaskStatus.Available)
                        {
                            List<AGVTaskModel> models = new List<AGVTaskModel>();
                            models.Add(new AGVTaskModel(TaskAvailableLevel.Both, AGV_LoadEmptyTray));
                            models.Add(new AGVTaskModel(TaskAvailableLevel.AGV, AfterEmptyTrayPositionArrived));
                            //List<AGVTaskModel> models = new List<AGVTaskModel>();
                            //models.Add(new AGVTaskModel(TaskAvailableLevel.Both, "AGV_LoadEmptyTray"));
                            //models.Add(new AGVTaskModel(TaskAvailableLevel.AGV, "AfterEmptyTrayPositionArrived"));

                            AddNewTaskToBind(device.Id, models);
                            //AddNewTaskToBind(device.Id, models);

                            if (AGV_LoadEmptyTray(bind.Id))
                            {
                                bind.IsEmptyTrayTaskAssigned = true;
                            }
                        }
                        else
                        {
                            Thread.Sleep(500);
                            Thread.Sleep(WAITTIME);
                        }
                    }
                });

            }
            else
            {
                bind.IsEmptyTrayEmpty = false;
                bind.IsEmptyTrayTaskAssigned = false;
            }

            return new ProcessResponse(true);
        }

        [ProcessMethod("", "Robot_Monitor_EmptyTrayEmpty", "机器人监听事件-满Tray区域放满", true)]
        [ProcessMethod("", "Robot_Monitor_FullTrayFull", "机器人监听事件-满Tray区域放满", true)]
        public ProcessResponse Robot_Monitor_FullTrayFull(IOperationConfig config, IDevice device)
        {
            //(device as AuboRobotDriver).IOChangedHandle.Reset();
            bool isFullTrayFull = config.InputPara[0] == 1;
            var bind = Config.AGVBindCollection.FirstOrDefault(u => u.RobotId == device.Id);
            if (isFullTrayFull)
@@ -319,20 +417,26 @@

                Task.Run(() =>
                {
                    Func<IOperationConfig, IDevice, ProcessResponse> action = AGV_UnloadFullTray;
                    while (bind.IsFullTrayFull && !bind.TaskList.Any(u => u.MethodFunc.Method.Name == action.Method.Name))
                    //Func<IOperationConfig, IDevice, ProcessResponse> action = AGV_UnloadFullTray;
                    while (bind.IsFullTrayFull && !bind.IsFullTrayTaskAssigned)
                    {
                        if (bind.TaskList.Count == 0)
                        //if (bind.TaskList.Count == 0)
                        if (bind.UnitStatus == TaskStatus.Available)
                        {
                            List<AGVTaskModel> models = new List<AGVTaskModel>();
                            models.Add(new AGVTaskModel(TaskAvailableLevel.Both, AGV_UnloadFullTray));
                            models.Add(new AGVTaskModel(TaskAvailableLevel.AGV, Robot_UnloadFullTray));
                            //List<AGVTaskModel> models = new List<AGVTaskModel>();
                            //models.Add(new AGVTaskModel(TaskAvailableLevel.Both, "AGV_UnloadFullTray"));
                            //models.Add(new AGVTaskModel(TaskAvailableLevel.AGV, "Robot_UnloadFullTray"));

                            AddNewTaskToBind(device.Id, models);
                            //AddNewTaskToBind(device.Id, models);

                            if (AGV_UnloadFullTray(bind.Id))
                            {
                                bind.IsFullTrayTaskAssigned = true;
                            }
                        }
                        else
                        {
                            Thread.Sleep(500);
                            Thread.Sleep(WAITTIME);
                        }
                    }
                });
@@ -340,9 +444,12 @@
            else
            {
                bind.IsFullTrayFull = false;
                bind.IsFullTrayTaskAssigned = false;
            }

            bind.RobotIOHandle.Set();
            //(device as AuboRobotDriver).IOChangedHandle.Set();

            //bind.RobotIOHandle.Set();

            return new ProcessResponse(true);
        }
@@ -350,11 +457,13 @@
        [ProcessMethod("", "Robot_Monitor_FullTrayEmpty", "机器人监听事件-满Tray区域清空", true)]
        public ProcessResponse Robot_Monitor_FullTrayEmpty(IOperationConfig config, IDevice device)
        {
            bool isFullTrayEmpty = config.InputPara[0] == 1;
            //(device as AuboRobotDriver).IOChangedHandle.Reset();
            bool isFullTrayEmpty = config.InputPara[0] == 0;
            var bind = Config.AGVBindCollection.FirstOrDefault(u => u.RobotId == device.Id);
            bind.IsFullTrayEmpty = isFullTrayEmpty;

            bind.RobotIOHandle.Set();
            //(device as AuboRobotDriver).IOChangedHandle.Set();
            //bind.RobotIOHandle.Set();

            return new ProcessResponse(true);
        }
@@ -399,7 +508,7 @@

            taskAssignedList.RemoveAll(u => u.AgvId == device.Id);

            bind.TaskList.Clear();
            //bind.ClearTask();
            bind.RobotStatus = bind.AGVStatus = TaskStatus.Available;

            return new ProcessResponse(true);
@@ -407,10 +516,28 @@
        #endregion

        #region 空Tray上料
        [ProcessMethod("", "AGV_LoadEmptyTray", "AGV去往空Tray上料", true)]
        public ProcessResponse AGV_LoadEmptyTray(IOperationConfig config, IDevice device)
        //[ProcessMethod("", "AGV_LoadEmptyTray", "AGV去往空Tray上料", true)]
        //public ProcessResponse AGV_LoadEmptyTray(IOperationConfig config, IDevice device)
        //{
        //    var bind = Config.AGVBindCollection.FirstOrDefault(u => u.Id == (config as AGVBindOpConfig).BindId);
        //    PathPosition position = Config.PositionCollection.FirstOrDefault(u => u.Description == PathPositionDefinition.LoadEmptyTray);

        //    if (position == null)
        //    {
        //        throw new ProcessException("路径配置未设置空Tray上料点");
        //    }

        //    bind.AGVDest = position.PositionCode;
        //    bind.AGV.TaskOrder(position.PositionCode);

        //    bind.AGVStatus = TaskStatus.Running;

        //    return new ProcessResponse(true);
        //}

        public bool AGV_LoadEmptyTray(string bindId)
        {
            var bind = Config.AGVBindCollection.FirstOrDefault(u => u.Id == (config as AGVBindOpConfig).BindId);
            var bind = Config.AGVBindCollection.FirstOrDefault(u => u.Id == bindId);
            PathPosition position = Config.PositionCollection.FirstOrDefault(u => u.Description == PathPositionDefinition.LoadEmptyTray);

            if (position == null)
@@ -418,19 +545,45 @@
                throw new ProcessException("路径配置未设置空Tray上料点");
            }

            bind.AGVDest = position.PositionCode;
            bind.AGV.TaskOrder(position.PositionCode);
            if (bind.SetAGVStatus(TaskStatus.Running))
            {
                bind.AGVDest = position.PositionCode;
                bind.AGV.TaskOrder(position.PositionCode);

            bind.AGVStatus = TaskStatus.Running;

            return new ProcessResponse(true);
                return true;
            }
            else
            {
                return false;
            }
        }

        [ProcessMethod("", "AfterEmptyTrayPositionArrived", "到达空Tray上料点", true)]
        public ProcessResponse AfterEmptyTrayPositionArrived(IOperationConfig config, IDevice device)
        //[ProcessMethod("", "AfterEmptyTrayPositionArrived", "到达空Tray上料点", true)]
        //public ProcessResponse AfterEmptyTrayPositionArrived(IOperationConfig config, IDevice device)
        //{
        //    var bind = Config.AGVBindCollection.FirstOrDefault(u => u.Id == (config as AGVBindOpConfig).BindId);
        //    PathPosition position = Config.PositionCollection.FirstOrDefault(u => u.Description == PathPositionDefinition.LoadEmptyTray);

        //    if (position == null)
        //    {
        //        throw new ProcessException("路径配置未设置空Tray上料点", null);
        //    }

        //    if (bind.AGV.CurrentPosition != position.PositionCode)
        //    {
        //        throw new ProcessException("AGV尚未到达空Tray上料点", null);
        //    }

        //    bind.Robot.SendMsg(RobotMsgAction.Load, RobotMsgParas.EmptyTray, 0);
        //    bind.RobotStatus = TaskStatus.Running;

        //    return new ProcessResponse(true);
        //}

        public void Robot_LoadEmptyTray(string bindId, PathPosition position)
        {
            var bind = Config.AGVBindCollection.FirstOrDefault(u => u.Id == (config as AGVBindOpConfig).BindId);
            PathPosition position = Config.PositionCollection.FirstOrDefault(u => u.Description == PathPositionDefinition.LoadEmptyTray);
            var bind = Config.AGVBindCollection.FirstOrDefault(u => u.Id == bindId);
            //PathPosition position = Config.PositionCollection.FirstOrDefault(u => u.Description == PathPositionDefinition.LoadEmptyTray);

            if (position == null)
            {
@@ -444,8 +597,6 @@

            bind.Robot.SendMsg(RobotMsgAction.Load, RobotMsgParas.EmptyTray, 0);
            bind.RobotStatus = TaskStatus.Running;

            return new ProcessResponse(true);
        }

        //[ProcessMethod("", "EmptyTrayReady", "空Tray上料完成", true)]
@@ -489,13 +640,13 @@
                    });
                }

                CheckEmptyTrayTask(position.PositionNo);
                CheckUnloadEmptyTrayTask(position.PositionNo);
            }

            return new ProcessResponse(true);
        }

        private async void CheckEmptyTrayTask(int positionNo)
        private async void CheckUnloadEmptyTrayTask(int positionNo)
        {
            await Task.Run(() =>
            {
@@ -506,55 +657,61 @@

                while (taskStatus.IsTaskNeed && !taskStatus.IsTaskAssgined)
                {
                    Func<IOperationConfig, IDevice, ProcessResponse> action = AGV_UnloadEmptyTray;
                    //Func<IOperationConfig, IDevice, ProcessResponse> action = AGV_UnloadEmptyTray;

                    //if (!Config.AGVBindCollection.Any(b => b.TaskList.Any(t => t.MethodFunc.Method.Name == action.Method.Name)))
                    //if (!Config.AGVBindCollection.Any(b => b.TaskList.Any(t => t.MethodName == "AGV_UnloadEmptyTray")))
                    {
                        var bind = Config.AGVBindCollection.FirstOrDefault(u => u.UnitStatus == TaskStatus.Available);
                        if (bind != null)
                        {
                            var position = Config.PositionCollection.FirstOrDefault(u => u.PositionNo == positionNo);
                            AGVTaskModel model_AGV = new AGVTaskModel(TaskAvailableLevel.Both, action, new AGVBindOpConfig(bind.Id, position));
                            AGVTaskModel model_Robot = new AGVTaskModel(TaskAvailableLevel.AGV, Robot_UnloadEmptyTray, new AGVBindOpConfig(bind.Id));
                            //AGVTaskModel model_AGV = new AGVTaskModel(TaskAvailableLevel.Both, "AGV_UnloadEmptyTray", new AGVBindOpConfig(bind.Id, position));
                            //AGVTaskModel model_Robot = new AGVTaskModel(TaskAvailableLevel.AGV, "Robot_UnloadEmptyTray", new AGVBindOpConfig(bind.Id));

                            bind.TaskList.Add(model_AGV);
                            bind.TaskList.Add(model_Robot);
                            //bind.AddTask(model_AGV);
                            //bind.AddTask(model_Robot);

                            taskStatus.IsTaskAssgined = true;
                            taskStatus.AgvId = bind.AGVId;
                            if (AGV_UnloadEmptyTray(bind.Id, position))
                            {
                                taskStatus.IsTaskAssgined = true;
                                taskStatus.AgvId = bind.AGVId;
                            }
                        }
                    }

                    Thread.Sleep(300);
                    Thread.Sleep(WAITTIME);
                }
            });
        }

        //[ProcessMethod("", "AGV_UnloadEmptyTray", "AGV去往卸载空Tray料位置", true)]
        public ProcessResponse AGV_UnloadEmptyTray(IOperationConfig config, IDevice device)
        public bool AGV_UnloadEmptyTray(string bindId, PathPosition position)
        {
            var bind = Config.AGVBindCollection.FirstOrDefault(u => u.Id == (config as AGVBindOpConfig).BindId);

            PathPosition position = (config as AGVBindOpConfig).Position;
            var bind = Config.AGVBindCollection.FirstOrDefault(u => u.Id == bindId);

            if (position == null)
            {
                throw new ProcessException("路径配置未设置空Tray下料点");
            }

            bind.AGVDest = position.PositionCode;
            bind.AGV.TaskOrder(position.PositionCode);
            if (bind.SetAGVStatus(TaskStatus.Running))
            {
                bind.AGVDest = position.PositionCode;
                bind.AGV.TaskOrder(position.PositionCode);

            bind.AGVStatus = TaskStatus.Running;

            return new ProcessResponse(true);
                return true;
            }
            else
            {
                return false;
            }
        }

        //[ProcessMethod("", "Robot_UnloadEmptyTray", "机器人运动至空Tray拍照位置", true)]
        public ProcessResponse Robot_UnloadEmptyTray(IOperationConfig config, IDevice device)
        public void Robot_UnloadEmptyTraySnap(string bindId, PathPosition position)
        {
            var bind = Config.AGVBindCollection.FirstOrDefault(u => u.Id == (config as AGVBindOpConfig).BindId);
            PathPosition position = Config.PositionCollection.FirstOrDefault(u => u.Description == PathPositionDefinition.UnloadEmptyTray && u.PositionCode == bind.AGV.CurrentPosition);
            var bind = Config.AGVBindCollection.FirstOrDefault(u => u.Id == bindId);
            //PathPosition position = Config.PositionCollection.FirstOrDefault(u => u.Description == PathPositionDefinition.UnloadEmptyTray && u.PositionCode == bind.AGV.CurrentPosition);

            if (position == null)
            {
@@ -565,8 +722,6 @@

            bind.RobotStatus = TaskStatus.Running;
            bind.Robot.SendMsg(RobotMsgAction.Move, RobotMsgParas.UnloadEmptyTraySnap, position.PositionNo);

            return new ProcessResponse(true);
        }

        //[ProcessMethod("", "Camera_UnloadEmptyTray", "相机确认空Tray卸载机器人位置调整", true)]
@@ -645,49 +800,60 @@
                throw new ProcessException("AGV当前未处于空Tray下料点");
            }

            PositionVisionConfig visionConfig = Config.VisionConfigCollection.FirstOrDefault(u => u.PositionCode == position.PositionCode && u.CameraId == bind.CameraId);
            float adjust_X = 0.0f;
            float adjust_Y = 0.0f;
            float adjust_Angle = 0.0f;

            if (visionConfig == null)
            if (Config.IsEnableVisionGuide)
            {
                throw new ProcessException("未配置该相机的空Tray下料点的视觉操作配置");
            }
                PositionVisionConfig visionConfig = Config.VisionConfigCollection.FirstOrDefault(u => u.PositionCode == position.PositionCode && u.CameraId == bind.CameraId);

            float x = 0;
            float y = 0;
            float angle = 0;

            using (HObject hImage = CollectHImage(bind.Camera, visionConfig.CameraOpConfig, "Camera_UnloadEmptyTray"))
            {
                string toolPath = visionConfig.CameraOpConfig.AlgorithemPath;
                if (!_halconToolDict.ContainsKey(toolPath))
                if (visionConfig == null)
                {
                    throw new ProcessException($"未配置Camera_UnloadEmptyTray的视觉算法路径");
                    throw new ProcessException("未配置该相机的空Tray下料点的视觉操作配置");
                }

                var tool = _halconToolDict[toolPath];
                tool.SetDictionary(new Dictionary<string, HTuple>() { { "OUTPUT_X", new HTuple() }, { "OUTPUT_Y", new HTuple() }, { "OUTPUT_Angle", new HTuple() } }, new Dictionary<string, HObject>() { { "INPUT_Image", hImage } });
                tool.RunProcedure();
                float x = 0;
                float y = 0;
                float angle = 0;

                x = (float)tool.GetResultTuple("OUTPUT_X").D;
                y = (float)tool.GetResultTuple("OUTPUT_Y").D;
                angle = (float)tool.GetResultTuple("OUTPUT_Angle").D;
                using (HObject hImage = CollectHImage(bind.Camera, visionConfig.CameraOpConfig, "Camera_UnloadEmptyTray"))
                {
                    string toolPath = visionConfig.CameraOpConfig.AlgorithemPath;
                    if (!_halconToolDict.ContainsKey(toolPath))
                    {
                        throw new ProcessException($"未配置Camera_UnloadEmptyTray的视觉算法路径");
                    }

                    var tool = _halconToolDict[toolPath];
                    tool.SetDictionary(new Dictionary<string, HTuple>() { { "OUTPUT_X", new HTuple() }, { "OUTPUT_Y", new HTuple() }, { "OUTPUT_Angle", new HTuple() } }, new Dictionary<string, HObject>() { { "INPUT_Image", hImage } });
                    tool.RunProcedure();

                    x = (float)tool.GetResultTuple("OUTPUT_X").D;
                    y = (float)tool.GetResultTuple("OUTPUT_Y").D;
                    angle = (float)tool.GetResultTuple("OUTPUT_Angle").D;
                }

                if (x <= 0 || y <= 0)
                {
                    throw new ProcessException("Camera_UnloadEmptyTray视觉计算获取点位不可小于0");
                }

                float dx = visionConfig.StandardPoint.X - x;
                float dy = visionConfig.StandardPoint.Y - y;

                HOperatorSet.AffineTransPoint2d(new HTuple(visionConfig.Matrix[0], visionConfig.Matrix[1], 0, visionConfig.Matrix[3], visionConfig.Matrix[4], 0), dx, dy, out HTuple dx_Robot, out HTuple dy_Robot);

                adjust_X = (float)dx_Robot.D;
                adjust_Y = (float)dy_Robot.D;
                adjust_Angle = visionConfig.StandardPoint.Angle - angle;
            }

            if (x <= 0 || y <= 0)
            {
                throw new ProcessException("Camera_UnloadEmptyTray视觉计算获取点位不可小于0");
            }

            float dx = visionConfig.StandardPoint.X - x;
            float dy = visionConfig.StandardPoint.Y - y;

            HOperatorSet.AffineTransPoint2d(new HTuple(visionConfig.Matrix[0], visionConfig.Matrix[1], 0, visionConfig.Matrix[3], visionConfig.Matrix[4], 0), dx, dy, out HTuple dx_Robot, out HTuple dy_Robot);

            //bind.Robot.SendMsg(RobotMsgAction.Unload, RobotMsgParas.EmptyTray, position.PositionNo, new List<float>() { (float)dx_Robot.D, (float)dy_Robot.D, angle });
            RobotMsg_UnloadEmptyTray.Action = RobotMsgAction.Unload;
            RobotMsg_UnloadEmptyTray.Para1 = RobotMsgParas.EmptyTray;
            RobotMsg_UnloadEmptyTray.Para2 = position.PositionNo;
            RobotMsg_UnloadEmptyTray.Datas = new List<float>() { (float)dx_Robot.D, (float)dy_Robot.D, angle }.ConvertAll(s => s.ToString()).ToList();
            RobotMsg_UnloadEmptyTray.Datas = new List<float>() { adjust_X, adjust_Y, 0, adjust_Angle }.ConvertAll(s => s.ToString()).ToList();
            bind.Robot.SendMsg(RobotMsg_UnloadEmptyTray, true);

            return new ProcessResponse(true);
@@ -741,7 +907,7 @@

                while (taskStatus.IsTaskNeed && !taskStatus.IsTaskAssgined)
                {
                    Func<IOperationConfig, IDevice, ProcessResponse> action = AGV_LoadFullTray;
                    //Func<IOperationConfig, IDevice, ProcessResponse> action = AGV_LoadFullTray;

                    //if (!Config.AGVBindCollection.Any(b => b.TaskList.Any(t => t.MethodFunc.Method.Name == action.Method.Name)))
                    {
@@ -749,14 +915,17 @@
                        if (bind != null)
                        {
                            var position = Config.PositionCollection.FirstOrDefault(u => u.PositionNo == positionNo);
                            AGVTaskModel model_AGV = new AGVTaskModel(TaskAvailableLevel.Both, action, new AGVBindOpConfig(bind.Id, position));
                            AGVTaskModel model_Robot = new AGVTaskModel(TaskAvailableLevel.AGV, Robot_LoadFullTray, new AGVBindOpConfig(bind.Id));
                            //AGVTaskModel model_AGV = new AGVTaskModel(TaskAvailableLevel.Both, "AGV_LoadFullTray", new AGVBindOpConfig(bind.Id, position));
                            //AGVTaskModel model_Robot = new AGVTaskModel(TaskAvailableLevel.AGV, "Robot_LoadFullTray", new AGVBindOpConfig(bind.Id));

                            bind.TaskList.Add(model_AGV);
                            bind.TaskList.Add(model_Robot);
                            //bind.AddTask(model_AGV);
                            //bind.AddTask(model_Robot);

                            taskStatus.IsTaskAssgined = true;
                            taskStatus.AgvId = bind.AGVId;
                            if (AGV_LoadFullTray(bind.Id, position))
                            {
                                taskStatus.IsTaskAssgined = true;
                                taskStatus.AgvId = bind.AGVId;
                            }
                        }
                    }

@@ -765,31 +934,59 @@
            });
        }

        [ProcessMethod("", "AGV_LoadFullTray", "AGV去往满Tray上料位置", true)]
        public ProcessResponse AGV_LoadFullTray(IOperationConfig config, IDevice device)
        //[ProcessMethod("", "AGV_LoadFullTray", "AGV去往满Tray上料位置", true)]
        public bool AGV_LoadFullTray(string bindId, PathPosition position)
        {
            var bind = Config.AGVBindCollection.FirstOrDefault(u => u.Id == (config as AGVBindOpConfig).BindId);
            var bind = Config.AGVBindCollection.FirstOrDefault(u => u.Id == bindId);

            PathPosition position = (config as AGVBindOpConfig).Position;
            //PathPosition position = (config as AGVBindOpConfig).Position;

            if (position == null)
            {
                throw new ProcessException("路径配置未设置满Tray上料点");
            }

            bind.AGVDest = position.PositionCode;
            bind.AGV.TaskOrder(position.PositionCode);
            if (bind.SetAGVStatus(TaskStatus.Running))
            {
                bind.AGVDest = position.PositionCode;
                bind.AGV.TaskOrder(position.PositionCode);

            bind.AGVStatus = TaskStatus.Running;
                return true;
            }
            else
            {
                return false;
            }

            return new ProcessResponse(true);
            //return new ProcessResponse(true);
        }

        [ProcessMethod("", "Robot_LoadFullTray", "机器人运动至满Tray拍照位置", true)]
        public ProcessResponse Robot_LoadFullTray(IOperationConfig config, IDevice device)
        //[ProcessMethod("", "Robot_LoadFullTray", "机器人运动至满Tray拍照位置", true)]
        //public ProcessResponse Robot_LoadFullTray(IOperationConfig config, IDevice device)
        //{
        //    var bind = Config.AGVBindCollection.FirstOrDefault(u => u.Id == (config as AGVBindOpConfig).BindId);
        //    PathPosition position = Config.PositionCollection.FirstOrDefault(u => u.Description == PathPositionDefinition.LoadFullTray && u.PositionCode == bind.AGV.CurrentPosition);

        //    if (position == null)
        //    {
        //        throw new ProcessException("路径配置未设置满Tray上料点");
        //    }

        //    //if (bind.AGV.CurrentPosition != position.PositionCode)
        //    //{
        //    //    throw new ProcessException("AGV当前未处于满Tray上料点");
        //    //}

        //    bind.RobotStatus = TaskStatus.Running;
        //    bind.Robot.SendMsg(RobotMsgAction.Move, RobotMsgParas.LoadFullTraySnap, position.PositionNo);

        //    return new ProcessResponse(true);
        //}

        public void Robot_LoadFullTraySnap(string bindId, PathPosition position)
        {
            var bind = Config.AGVBindCollection.FirstOrDefault(u => u.Id == (config as AGVBindOpConfig).BindId);
            PathPosition position = Config.PositionCollection.FirstOrDefault(u => u.Description == PathPositionDefinition.LoadFullTray && u.PositionCode == bind.AGV.CurrentPosition);
            var bind = Config.AGVBindCollection.FirstOrDefault(u => u.Id == bindId);
            //PathPosition position = Config.PositionCollection.FirstOrDefault(u => u.Description == PathPositionDefinition.LoadFullTray && u.PositionCode == bind.AGV.CurrentPosition);

            if (position == null)
            {
@@ -803,8 +1000,6 @@

            bind.RobotStatus = TaskStatus.Running;
            bind.Robot.SendMsg(RobotMsgAction.Move, RobotMsgParas.LoadFullTraySnap, position.PositionNo);

            return new ProcessResponse(true);
        }

        //[ProcessMethod("", "Camera_LoadFullTray", "相机确认满Tray上料机器人位置调整", true)]
@@ -883,49 +1078,60 @@
                throw new ProcessException("AGV当前未处于满Tray上料点");
            }

            PositionVisionConfig visionConfig = Config.VisionConfigCollection.FirstOrDefault(u => u.PositionCode == position.PositionCode && u.CameraId == bind.CameraId);
            float adjust_X = 0.0f;
            float adjust_Y = 0.0f;
            float adjust_Angle = 0.0f;

            if (visionConfig == null)
            if (Config.IsEnableVisionGuide)
            {
                throw new ProcessException("未配置该相机的满Tray上料点的视觉操作配置");
            }
                PositionVisionConfig visionConfig = Config.VisionConfigCollection.FirstOrDefault(u => u.PositionCode == position.PositionCode && u.CameraId == bind.CameraId);

            float x = 0;
            float y = 0;
            float angle = 0;

            using (HObject hImage = CollectHImage(bind.Camera, visionConfig.CameraOpConfig, "Camera_LoadFullTray"))
            {
                string toolPath = visionConfig.CameraOpConfig.AlgorithemPath;
                if (!_halconToolDict.ContainsKey(toolPath))
                if (visionConfig == null)
                {
                    throw new ProcessException($"未配置Camera_LoadFullTray的视觉算法路径");
                    throw new ProcessException("未配置该相机的满Tray上料点的视觉操作配置");
                }

                var tool = _halconToolDict[toolPath];
                tool.SetDictionary(new Dictionary<string, HTuple>() { { "OUTPUT_X", new HTuple() }, { "OUTPUT_Y", new HTuple() }, { "OUTPUT_Angle", new HTuple() } }, new Dictionary<string, HObject>() { { "INPUT_Image", hImage } });
                tool.RunProcedure();
                float x = 0;
                float y = 0;
                float angle = 0;

                x = (float)tool.GetResultTuple("OUTPUT_X").D;
                y = (float)tool.GetResultTuple("OUTPUT_Y").D;
                angle = (float)tool.GetResultTuple("OUTPUT_Angle").D;
                using (HObject hImage = CollectHImage(bind.Camera, visionConfig.CameraOpConfig, "Camera_LoadFullTray"))
                {
                    string toolPath = visionConfig.CameraOpConfig.AlgorithemPath;
                    if (!_halconToolDict.ContainsKey(toolPath))
                    {
                        throw new ProcessException($"未配置Camera_LoadFullTray的视觉算法路径");
                    }

                    var tool = _halconToolDict[toolPath];
                    tool.SetDictionary(new Dictionary<string, HTuple>() { { "OUTPUT_X", new HTuple() }, { "OUTPUT_Y", new HTuple() }, { "OUTPUT_Angle", new HTuple() } }, new Dictionary<string, HObject>() { { "INPUT_Image", hImage } });
                    tool.RunProcedure();

                    x = (float)tool.GetResultTuple("OUTPUT_X").D;
                    y = (float)tool.GetResultTuple("OUTPUT_Y").D;
                    angle = (float)tool.GetResultTuple("OUTPUT_Angle").D;
                }

                if (x <= 0 || y <= 0)
                {
                    throw new ProcessException("Camera_LoadFullTray视觉计算获取点位不可小于0");
                }

                float dx = visionConfig.StandardPoint.X - x;
                float dy = visionConfig.StandardPoint.Y - y;

                HOperatorSet.AffineTransPoint2d(new HTuple(visionConfig.Matrix[0], visionConfig.Matrix[1], 0, visionConfig.Matrix[3], visionConfig.Matrix[4], 0), dx, dy, out HTuple dx_Robot, out HTuple dy_Robot);

                adjust_X = (float)dx_Robot.D;
                adjust_Y = (float)dy_Robot.D;
                adjust_Angle = visionConfig.StandardPoint.Angle - angle;
            }

            if (x <= 0 || y <= 0)
            {
                throw new ProcessException("Camera_LoadFullTray视觉计算获取点位不可小于0");
            }

            float dx = visionConfig.StandardPoint.X - x;
            float dy = visionConfig.StandardPoint.Y - y;

            HOperatorSet.AffineTransPoint2d(new HTuple(visionConfig.Matrix[0], visionConfig.Matrix[1], 0, visionConfig.Matrix[3], visionConfig.Matrix[4], 0), dx, dy, out HTuple dx_Robot, out HTuple dy_Robot);

            //bind.Robot.SendMsg(RobotMsgAction.Load, RobotMsgParas.FullTray, position.PositionNo, new List<float>() { (float)dx_Robot.D, (float)dy_Robot.D, angle });
            RobotMsg_LoadFullTray.Action = RobotMsgAction.Load;
            RobotMsg_LoadFullTray.Para1 = RobotMsgParas.FullTray;
            RobotMsg_LoadFullTray.Para2 = position.PositionNo;
            RobotMsg_LoadFullTray.Datas = new List<float>() { (float)dx_Robot.D, (float)dy_Robot.D, angle }.ConvertAll(s => s.ToString()).ToList();
            RobotMsg_LoadFullTray.Datas = new List<float>() { adjust_X, adjust_Y, 0, adjust_Angle }.ConvertAll(s => s.ToString()).ToList();
            bind.Robot.SendMsg(RobotMsg_LoadFullTray, true);

            return new ProcessResponse(true);
@@ -933,10 +1139,28 @@
        #endregion

        #region 满Tray产线下料
        [ProcessMethod("", "AGV_UnloadFullTray", "AGV去往卸载满Tray料", true)]
        public ProcessResponse AGV_UnloadFullTray(IOperationConfig config, IDevice device)
        //[ProcessMethod("", "AGV_UnloadFullTray", "AGV去往卸载满Tray料", true)]
        //public ProcessResponse AGV_UnloadFullTray(IOperationConfig config, IDevice device)
        //{
        //    var bind = Config.AGVBindCollection.FirstOrDefault(u => u.Id == (config as AGVBindOpConfig).BindId);
        //    PathPosition position = Config.PositionCollection.FirstOrDefault(u => u.Description == PathPositionDefinition.UnloadFullTray);

        //    if (position == null)
        //    {
        //        throw new ProcessException("路径配置未设置满Tray下料点");
        //    }

        //    bind.AGVDest = position.PositionCode;
        //    bind.AGV.TaskOrder(position.PositionCode);

        //    bind.AGVStatus = TaskStatus.Running;

        //    return new ProcessResponse(true);
        //}

        public bool AGV_UnloadFullTray(string bindId)
        {
            var bind = Config.AGVBindCollection.FirstOrDefault(u => u.Id == (config as AGVBindOpConfig).BindId);
            var bind = Config.AGVBindCollection.FirstOrDefault(u => u.Id == bindId);
            PathPosition position = Config.PositionCollection.FirstOrDefault(u => u.Description == PathPositionDefinition.UnloadFullTray);

            if (position == null)
@@ -944,19 +1168,45 @@
                throw new ProcessException("路径配置未设置满Tray下料点");
            }

            bind.AGVDest = position.PositionCode;
            bind.AGV.TaskOrder(position.PositionCode);
            if (bind.SetAGVStatus(TaskStatus.Running))
            {
                bind.AGVDest = position.PositionCode;
                bind.AGV.TaskOrder(position.PositionCode);

            bind.AGVStatus = TaskStatus.Running;

            return new ProcessResponse(true);
                return true;
            }
            else
            {
                return false;
            }
        }

        [ProcessMethod("", "Robot_UnloadFullTray", "机器人卸载满Tray", true)]
        public ProcessResponse Robot_UnloadFullTray(IOperationConfig config, IDevice device)
        //[ProcessMethod("", "Robot_UnloadFullTray", "机器人卸载满Tray", true)]
        //public ProcessResponse Robot_UnloadFullTray(IOperationConfig config, IDevice device)
        //{
        //    var bind = Config.AGVBindCollection.FirstOrDefault(u => u.Id == (config as AGVBindOpConfig).BindId);
        //    PathPosition position = Config.PositionCollection.FirstOrDefault(u => u.Description == PathPositionDefinition.UnloadFullTray);

        //    if (position == null)
        //    {
        //        throw new ProcessException("路径配置未设置满Tray下料点");
        //    }

        //    if (bind.AGV.CurrentPosition != position.PositionCode)
        //    {
        //        throw new ProcessException("AGV当前未处于满Tray下料点");
        //    }

        //    bind.RobotStatus = TaskStatus.Running;
        //    bind.Robot.SendMsg(RobotMsgAction.Move, RobotMsgParas.LineSnap, position.PositionNo);

        //    return new ProcessResponse(true);
        //}

        public void Robot_UnloadFullTraySnap(string bindId, PathPosition position)
        {
            var bind = Config.AGVBindCollection.FirstOrDefault(u => u.Id == (config as AGVBindOpConfig).BindId);
            PathPosition position = Config.PositionCollection.FirstOrDefault(u => u.Description == PathPositionDefinition.UnloadFullTray);
            var bind = Config.AGVBindCollection.FirstOrDefault(u => u.Id == bindId);
            //PathPosition position = Config.PositionCollection.FirstOrDefault(u => u.Description == PathPositionDefinition.UnloadFullTray);

            if (position == null)
            {
@@ -970,8 +1220,7 @@

            bind.RobotStatus = TaskStatus.Running;
            bind.Robot.SendMsg(RobotMsgAction.Move, RobotMsgParas.LineSnap, position.PositionNo);

            return new ProcessResponse(true);
            //LogAsync(DateTime.Now, "Robot运动至下满Tray拍照", "");
        }

        //[ProcessMethod("", "Camera_UnloadFullTray", "相机操作卸载满Tray", true)]
@@ -991,52 +1240,64 @@
                throw new ProcessException("AGV当前未处于满Tray下料点");
            }

            PositionVisionConfig visionConfig = Config.VisionConfigCollection.FirstOrDefault(u => u.PositionCode == position.PositionCode && u.CameraId == bind.CameraId);

            if (visionConfig == null)
            {
                throw new ProcessException("未配置该相机的满Tray下料点的视觉操作配置");
            }

            //float adjust_X = 0.0f;
            //float adjust_Y = 0.0f;
            //float adjust_Angle = 0.0f;
            bool isLineReady = false;
            int reTryTime = Config.LineBusyRetryTimes;

            do
            if (Config.IsEnableVisionGuide)
            {
                using (HObject hImage = CollectHImage(bind.Camera, visionConfig.CameraOpConfig, "Camera_UnloadFullTray"))
                PositionVisionConfig visionConfig = Config.VisionConfigCollection.FirstOrDefault(u => u.PositionCode == position.PositionCode && u.CameraId == bind.CameraId);

                if (visionConfig == null)
                {
                    string toolPath = visionConfig.CameraOpConfig.AlgorithemPath;
                    if (!_halconToolDict.ContainsKey(toolPath))
                    throw new ProcessException("未配置该相机的满Tray下料点的视觉操作配置");
                }


                int reTryTime = Config.LineBusyRetryTimes;

                do
                {
                    using (HObject hImage = CollectHImage(bind.Camera, visionConfig.CameraOpConfig, "Camera_UnloadFullTray"))
                    {
                        throw new ProcessException($"未配置Camera_UnloadFullTray的视觉算法路径");
                        string toolPath = visionConfig.CameraOpConfig.AlgorithemPath;
                        if (!_halconToolDict.ContainsKey(toolPath))
                        {
                            throw new ProcessException($"未配置Camera_UnloadFullTray的视觉算法路径");
                        }

                        _halconToolDict[toolPath].SetDictionary(new Dictionary<string, HTuple>() { { "OUTPUT_Result", new HTuple() } }, new Dictionary<string, HObject>() { { "INPUT_Image", hImage } });
                        _halconToolDict[toolPath].RunProcedure();

                        isLineReady = _halconToolDict[toolPath].GetResultTuple("OUTPUT_Result").I == 1;
                    }

                    _halconToolDict[toolPath].SetDictionary(new Dictionary<string, HTuple>() { { "OUTPUT_Result", new HTuple() } }, new Dictionary<string, HObject>() { { "INPUT_Image", hImage } });
                    _halconToolDict[toolPath].RunProcedure();
                    if (!isLineReady)
                    {
                        Thread.Sleep(Config.LineBusyWaitInterval * 1000);
                        reTryTime--;
                    }
                    else
                    {
                        reTryTime = 0;
                    }
                } while (reTryTime > 0);

                    isLineReady = _halconToolDict[toolPath].GetResultTuple("OUTPUT_Result").I == 1;
                }

                if (!isLineReady)
                {
                    Thread.Sleep(Config.LineBusyWaitInterval * 1000);
                    reTryTime--;
                }
                else
                {
                    reTryTime = 0;
                }
            } while (reTryTime > 0);

            //if (!isLineReady)
            //{
            //    bind.Robot.SendMsg(RobotMsgType.Send, -1, true, RobotMsgAction.State, RobotMsgParas.LineSnap, new List<string>() { "-1" });
            //    throw new ProcessException("产线忙，等待超时");
            //}
            //else
            //{
            //    bind.Robot.SendMsg(RobotMsgType.Send, -1, true, RobotMsgAction.State, RobotMsgParas.LineSnap, new List<string>() { "1" });
            //}
                //if (!isLineReady)
                //{
                //    bind.Robot.SendMsg(RobotMsgType.Send, -1, true, RobotMsgAction.State, RobotMsgParas.LineSnap, new List<string>() { "-1" });
                //    throw new ProcessException("产线忙，等待超时");
                //}
                //else
                //{
                //    bind.Robot.SendMsg(RobotMsgType.Send, -1, true, RobotMsgAction.State, RobotMsgParas.LineSnap, new List<string>() { "1" });
                //}
            }
            else
            {
                isLineReady = true;
            }

            if (isLineReady)
            {
@@ -1052,9 +1313,15 @@
        #endregion
    }

    //[Device("AGVBind", "AGVBind", EnumHelper.DeviceAttributeType.OperationConfig)]
    public class AGVBindOpConfig : OperationConfigBase
    {
        [Category("设备信息")]
        [Description("操作相关的设备编号")]
        public string BindId { get; set; }

        [Category("位置信息")]
        [Description("操作相关的位置")]
        public PathPosition Position { get; set; }

        public AGVBindOpConfig() { }