Merge branch 'master' of http://gitblit.broconcentric.com:8088/r/M071

wells.liu

2020-06-29 c339e592f9232e460602093cb3248adf2484eebb

Merge branch 'master' of http://gitblit.broconcentric.com:8088/r/M071

 src/Bro.Common.Device/DeviceBase/PLCBase.cs

@@ -280,6 +280,11 @@

            return locations;
        }

        public bool MoveToPoint(IOperationConfig opConfig)
        {
            throw new NotImplementedException();
        }
        #endregion
    }


 src/Bro.Common.Device/Interface/IMotion.cs

@@ -1,4 +1,5 @@
using Bro.Common.Helper;
using Bro.Common.Interface;
using System;
using System.Collections.Generic;
using System.Linq;
@@ -13,6 +14,13 @@
    public interface IMotion
    {
        List<AxisInfo> GetCurrentAxisInfo(params string[] axisName);

        /// <summary>
        /// 运动机构点到点移动
        /// </summary>
        /// <param name="opConfig">运动配置</param>
        /// <returns>true：正常结束 false：异常结束</returns>
        bool MoveToPoint(IOperationConfig opConfig);
    }

    public class AxisInfo : IComplexDisplay

 src/Bro.Common.Model/Model/Spec.cs

@@ -15,7 +15,7 @@
    {
        [Category("通用配置")]
        [Description("标准代码")]
        public string Code { get; set; }
        public virtual string Code { get; set; }

        [Category("通用配置")]
        [Description("启用状态，true：启用；false：禁用")]
@@ -25,22 +25,22 @@
        [Category("标准配置")]
        [Description("标准值")]
        [DisplayName("标准值")]
        public float StandardValue { get; set; }
        public double StandardValue { get; set; }

        [Category("标准配置")]
        [Description("正公差")]
        [DisplayName("正公差")]
        public float Tolrenance_Positive { get; set; }
        public double Tolrenance_Positive { get; set; }

        [Category("标准配置")]
        [Description("负公差")]
        [DisplayName("负公差")]
        public float Tolrenance_Negative { get; set; }
        public double Tolrenance_Negative { get; set; }

        protected float? actualValue = null;
        protected double? actualValue = null;
        [Browsable(false)]
        [JsonIgnore]
        public virtual float? ActualValue
        public virtual double? ActualValue
        {
            get
            {
@@ -67,7 +67,7 @@

        [Browsable(false)]
        [JsonIgnore]
        public bool MeasureResult { get; set; } = false;
        public bool? MeasureResult { get; set; } = null;

        public virtual string GetCSVHead()
        {

 src/Bro.Device.Gocator/Bro.Device.Gocator.csproj

@@ -45,5 +45,15 @@
    <Compile Include="GocatorDriver.cs" />
    <Compile Include="Properties\AssemblyInfo.cs" />
  </ItemGroup>
  <ItemGroup>
    <ProjectReference Include="..\Bro.Common.Device\Bro.Common.Device.csproj">
      <Project>{987308DD-8BAA-463A-94E2-77D62E01A5BF}</Project>
      <Name>Bro.Common.Device</Name>
    </ProjectReference>
    <ProjectReference Include="..\Bro.Common.Model\Bro.Common.Model.csproj">
      <Project>{1a3cbfe7-3f78-42c3-95c5-10360450dbea}</Project>
      <Name>Bro.Common.Model</Name>
    </ProjectReference>
  </ItemGroup>
  <Import Project="$(MSBuildToolsPath)\Microsoft.CSharp.targets" />
</Project>

 src/Bro.Device.Gocator/GocatorConfig.cs

@@ -1,4 +1,6 @@
using System;
using Bro.Common.Base;
using Bro.Common.Helper;
using System;
using System.Collections.Generic;
using System.Linq;
using System.Text;
@@ -6,7 +8,13 @@

namespace Bro.Device.Gocator
{
    class GocatorConfig
    [Device("Gocator", "Gocator激光扫描仪", EnumHelper.DeviceAttributeType.InitialConfig)]
    public class GocatorInitialConfig : CameraInitialConfigBase
    {
    }

    [Device("Gocator", "Gocator激光扫描仪", EnumHelper.DeviceAttributeType.OperationConfig)]
    public class GocatorOperationConfig : CameraOprerationConfigBase
    {
    }
}

 src/Bro.Device.Gocator/GocatorDriver.cs

@@ -1,4 +1,7 @@
using System;
using Bro.Common.Base;
using Bro.Common.Helper;
using Bro.Common.Interface;
using System;
using System.Collections.Generic;
using System.Linq;
using System.Text;
@@ -6,7 +9,37 @@

namespace Bro.Device.Gocator
{
    class GocatorDriver
    [Device("Gocator", "Gocator激光扫描仪", EnumHelper.DeviceAttributeType.Device)]
    public class GocatorDriver : CameraBase
    {
        public override IOperationConfig GetOperationConfigFromDevice()
        {
            throw new NotImplementedException();
        }

        public override void Snapshot()
        {
            throw new NotImplementedException();
        }

        public override void UploadOperationConfig(IOperationConfig config)
        {
            throw new NotImplementedException();
        }

        protected override void Init()
        {
            throw new NotImplementedException();
        }

        protected override void Pause()
        {
            throw new NotImplementedException();
        }

        protected override void Resume()
        {
            throw new NotImplementedException();
        }
    }
}

 src/Bro.M071.Process/Bro.M071.Process.csproj

@@ -39,6 +39,17 @@
    <Reference Include="Autofac, Version=4.9.4.0, Culture=neutral, PublicKeyToken=17863af14b0044da, processorArchitecture=MSIL">
      <HintPath>..\..\packages\Autofac.4.9.4\lib\net45\Autofac.dll</HintPath>
    </Reference>
    <Reference Include="halcondotnet, Version=12.0.0.0, Culture=neutral, PublicKeyToken=4973bed59ddbf2b8, processorArchitecture=MSIL">
      <SpecificVersion>False</SpecificVersion>
      <HintPath>..\..\libs\halcon12\halcondotnet.dll</HintPath>
    </Reference>
    <Reference Include="hdevenginedotnet, Version=12.0.0.0, Culture=neutral, PublicKeyToken=4973bed59ddbf2b8, processorArchitecture=MSIL">
      <SpecificVersion>False</SpecificVersion>
      <HintPath>..\..\libs\halcon12\hdevenginedotnet.dll</HintPath>
    </Reference>
    <Reference Include="Newtonsoft.Json, Version=11.0.0.0, Culture=neutral, PublicKeyToken=30ad4fe6b2a6aeed, processorArchitecture=MSIL">
      <HintPath>..\..\packages\Newtonsoft.Json.11.0.2\lib\net45\Newtonsoft.Json.dll</HintPath>
    </Reference>
    <Reference Include="System" />
    <Reference Include="System.Core" />
    <Reference Include="System.Xml.Linq" />

 src/Bro.M071.Process/M071Config.cs

@@ -22,10 +22,10 @@
        public List<string> KeyNameCollection { get; set; } = new List<string>();

        [Category("公共字典配置")]
        [Description("检测标准集合")]
        [Description("检测类型和标准集合")]
        [TypeConverter(typeof(CollectionCountConvert))]
        [Editor(typeof(ComplexCollectionEditor<Spec>), typeof(UITypeEditor))]
        public List<Spec> MeasureSpecCollection { get; set; } = new List<Spec>();
        [Editor(typeof(ComplexCollectionEditor<MeasureType>), typeof(UITypeEditor))]
        public List<MeasureType> MeasureTypeCollection { get; set; } = new List<MeasureType>();

        [Category("公共字典配置")]
        [Description("单键算法配置集合")]

 src/Bro.M071.Process/M071Converters.cs

@@ -49,7 +49,7 @@

                if (iConfig is M071Config config)
                {
                    config.SnapshotPointCollection.ForEach(s =>
                    config.SnapshotPointCollection.Where(u => u.IsEnabled).ToList().ForEach(s =>
                    {
                        table[s.Id] = s.Name;
                    });
@@ -141,7 +141,7 @@

                if (iConfig is M071Config config)
                {
                    var resultIds = config.KeyUnitCollection.Where(u => u.Key == (context.Instance as KeyUnitBind).Key).Select(u => u.KeyResult).ToList();
                    var resultIds = config.KeyUnitCollection.Where(u => u.IsEnabled && u.Key == (context.Instance as KeyUnitBind).Key).Select(u => u.KeyResultId).ToList();

                    var result = config.KeyResultCollection.Where(u => resultIds.Contains(u.Id)).SelectMany(u => u.Results).ToList();

@@ -149,10 +149,10 @@
                    {
                        result.ForEach(r =>
                        {
                            table[r] = r;
                            table.Add(r, r);
                        });

                        table[""] = "";
                        table.Add("All", "All");
                    }
                }
            }
@@ -181,7 +181,7 @@

                if (iConfig is M071Config config)
                {
                    return new StandardValuesCollection(config.MeasureSpecCollection.Select(u => u.Code).ToList());
                    return new StandardValuesCollection(config.MeasureTypeCollection.Select(u => u.Code).ToList());
                }
            }


 src/Bro.M071.Process/M071Models.cs

@@ -3,6 +3,7 @@
using Bro.Common.Helper;
using Bro.Common.Interface;
using Bro.Common.Model;
using Newtonsoft.Json;
using System;
using System.Collections.Generic;
using System.ComponentModel;
@@ -34,6 +35,19 @@
        }
    }

    public class MeasureType : Spec
    {
        [Category("检测类型")]
        [Description("检测类型")]
        [DisplayName("检测类型")]
        public override string Code { get; set; }

        [Category("检测算法")]
        [Description("检测算法路径")]
        [Editor(typeof(FileDialogEditor), typeof(UITypeEditor))]
        public string AlgorithemPath { get; set; }
    }

    public class KeyResult : IComplexDisplay
    {
        [Browsable(false)]
@@ -59,7 +73,7 @@
    {
        public string GetDisplayText()
        {
            return Name + " " + string.Join(" ", Destination.Select(u => u.GetDisplayText())) + " " + CameraOp.GetDisplayText();
            return (IsEnabled ? "" : "禁用 ") + Name + " " + string.Join(" ", Destination.Select(u => u.GetDisplayText())) + " " + CameraOp.GetDisplayText();
        }

        public List<string> GetHalconToolPathList()
@@ -81,6 +95,10 @@
        [Description("拍照点名称")]
        public string Name { get; set; }

        [Category("启用设置")]
        [Description("true：启用 false：禁用")]
        public bool IsEnabled { get; set; } = true;

        [Category("设备配置")]
        [Description("运动设备")]
        [TypeConverter(typeof(DeviceSelectorConverter<IMotion>))]
@@ -101,6 +119,7 @@

    public class KeyUnit : IComplexDisplay, IHalconToolPath
    {
        #region 配置
        private string key = "";
        [Category("键名配置")]
        [Description("单键检测键名")]
@@ -118,24 +137,36 @@
        [Description("别名")]
        public string AlignName { get; set; }

        [Category("启用设置")]
        [Description("true：启用 false：禁用")]
        public bool IsEnabled { get; set; } = true;

        [Category("图像来源")]
        [Description("拍照点位")]
        [TypeConverter(typeof(SnapshotPointConverter))]
        public string SnapshotPoint { get; set; }
        public string SnapshotPointId { get; set; }

        [Category("图像来源")]
        [Description("拍照点位获取的图片索引")]
        public int ImageIndex { get; set; } = 0;
        [Description("拍照点位获取的图片序号，从1开始")]
        public int ImageSeq { get; set; } = 1;

        [Category("算法配置")]
        [Description("单键检测配置算法类型")]
        [TypeConverter(typeof(KeyAlgorithemConverter))]
        public string KeyAlgorithem { get; set; }
        public string KeyAlgorithemId { get; set; }

        [Category("算法配置")]
        [Description("单键检测配置结果类型")]
        [TypeConverter(typeof(KeyResultConverter))]
        public string KeyResult { get; set; }
        public string KeyResultId { get; set; }
        #endregion

        #region 检测相关字段
        public Dictionary<string, double> KeyValues = null;
        //public SnapshotPoint SnapshotPoint = null;
        public string KeyAlgorithemPath = "";
        public List<string> KeyResultList = null;
        #endregion

        public string GetDisplayText()
        {
@@ -144,15 +175,68 @@

        public List<string> GetHalconToolPathList()
        {
            return null;
            using (var scope = GlobalVar.Container.BeginLifetimeScope())
            {
                IProcessConfig iConfig = scope.Resolve<IProcessConfig>();

                if (iConfig is M071Config config)
                {
                    var algo = config.KeyAlgorithemCollection.FirstOrDefault(u => u.Id == KeyAlgorithemId);
                    if (algo != null)
                    {
                        return new List<string>() { algo.AlgorithemPath };
                    }
        }
    }

    public class MeasurementUint : IComplexDisplay
            return new List<string>();
        }
    }

    public class ProductionMeasurement : INotifyPropertyChanged, IDisposable
    {
        public string Barcode { get; set; }

        public List<MeasurementUint> Measurements { get; set; } = new List<MeasurementUint>();

        public event PropertyChangedEventHandler PropertyChanged;

        public void Dispose()
        {
            Barcode = null;

            Measurements?.ForEach(m => m?.Dispose());
            Measurements = null;
            GC.Collect();
        }

        public void InitialMeasurementsPropertyChanged()
        {
            Measurements.ForEach(m => m.PropertyChanged += M_PropertyChanged);
        }

        private object pChangedLock = new object();
        private void M_PropertyChanged(object sender, PropertyChangedEventArgs e)
        {
            lock (pChangedLock)
            {
                PropertyChanged?.Invoke(this, new PropertyChangedEventArgs("Measurements"));
            }
        }
    }

    public class MeasurementUint : IComplexDisplay, INotifyPropertyChanged, IDisposable
    {
        public string Id = Guid.NewGuid().ToString();

        #region 配置
        [Category("名称")]
        [Description("名称")]
        public string Name { get; set; } = "";

        [Category("启用设置")]
        [Description("true：启用 false：禁用")]
        public bool IsEnabled { get; set; } = true;

        [Category("算法配置")]
        [Description("检测和标准类型")]
@@ -164,24 +248,51 @@
        [TypeConverter(typeof(ComplexObjectConvert))]
        [Editor(typeof(ComplexCollectionEditor<KeyUnitBind>), typeof(UITypeEditor))]
        public List<KeyUnitBind> KeyUnitCollection { get; set; } = new List<KeyUnitBind>();
        #endregion

        #region 显示
        [Browsable(false)]
        public RectangleF DisplayLocation { get; set; } = new RectangleF();
        public Rectangle DisplayLocation { get; set; } = new Rectangle();
        #endregion

        #region 检测结果
        [Browsable(false)]
        public MeasureType Spec { get; set; } = null;
        #endregion

        public bool IsUpdated = false;
        public event PropertyChangedEventHandler PropertyChanged;

        public void Dispose()
        {
            KeyUnitCollection?.ForEach(k => k?.Dispose());
            KeyUnitCollection = null;
        }

        public string GetDisplayText()
        {
            if (string.IsNullOrWhiteSpace(Name))
            {
                return string.Join("-", KeyUnitCollection.Select(u => u.GetDisplayText())) + "-" + MeasureType.ToString();
                return (IsEnabled ? "" : "禁用 ") + string.Join("-", KeyUnitCollection.Select(u => u.GetDisplayText())) + "-" + MeasureType.ToString();
            }
            else
            {
                return Name;
            }
                return (IsEnabled ? "" : "禁用 ") + Name;
        }
    }

    public class KeyUnitBind : IComplexDisplay
        public void InitialKeyUnitMeasureChanged()
        {
            KeyUnitCollection.ForEach(k => k.PropertyChanged += K_PropertyChanged);
        }

        private void K_PropertyChanged(object sender, PropertyChangedEventArgs e)
        {
            PropertyChanged?.Invoke(this, new PropertyChangedEventArgs("KeyUnitCollection"));
        }
    }

    public class KeyUnitBind : IComplexDisplay, INotifyPropertyChanged, IDisposable
    {
        [Category("单键配置")]
        [Description("单键配置")]
@@ -193,6 +304,26 @@
        [TypeConverter(typeof(KeyUnitResultConverter))]
        public string KeyResult { get; set; } = "";

        //[Browsable(false)]
        //public NoticedDictionary<string, double?> MeasureValueDict { get; set; } = new NoticedDictionary<string, double?>();

        [Browsable(false)]
        public Dictionary<string, double?> MeasureValueDict { get; set; } = new Dictionary<string, double?>();

        public event PropertyChangedEventHandler PropertyChanged;

        //public void InitialMeasureValueDictPropertyChanged()
        //{
        //    MeasureValueDict.PropertyChanged += MeasureValueDict_PropertyChanged;
        //}

        //private void MeasureValueDict_PropertyChanged(object sender, PropertyChangedEventArgs e)
        //{
        //    PropertyChanged?.Invoke(this, new PropertyChangedEventArgs("MeasureValueDict"));
        //}

        public bool? IsDone = null;

        public string GetDisplayText()
        {
            string msg = Key;
@@ -201,5 +332,55 @@

            return msg;
        }

        public void Dispose()
        {
            MeasureValueDict = null;
    }

        object valueDictLock = new object();
        public void FillKeyValues(Dictionary<string, double> valuePairs)
        {
            lock (valueDictLock)
            {
                if (valuePairs == null || valuePairs.Count == 0)
                {
                    IsDone = false;
                }

                foreach (KeyValuePair<string, double> pair in valuePairs)
                {
                    if (MeasureValueDict.ContainsKey(pair.Key))
                    {
                        MeasureValueDict[pair.Key] = pair.Value;
                    }
                }

                if (MeasureValueDict.Values.All(u => u != null))
                {
                    IsDone = true;
                }

                if (IsDone != null)
                {
                    PropertyChanged?.Invoke(this, new PropertyChangedEventArgs("IsDone"));
                }
            }
        }
    }

    //public class NoticedDictionary<T1, T2> : Dictionary<T1, T2>, INotifyPropertyChanged
    //{
    //    public event PropertyChangedEventHandler PropertyChanged;

    //    public new T2 this[T1 index]
    //    {
    //        get => base[index];
    //        set
    //        {
    //            base[index] = value;
    //            PropertyChanged?.Invoke(this, new PropertyChangedEventArgs("Index"));
    //        }
    //    }
    //}
}

 src/Bro.M071.Process/M071Process.cs

@@ -1,8 +1,13 @@
using Bro.Common.Helper;
using Bro.Common.Base;
using Bro.Common.Helper;
using Bro.Common.Interface;
using Bro.Common.Model;
using Bro.Process;
using HalconDotNet;
using System;
using System.Collections.Generic;
using System.ComponentModel;
using System.IO;
using System.Linq;
using System.Text;
using System.Threading.Tasks;
@@ -23,5 +28,361 @@
            get => IConfig as M071Config;
        }
        #endregion

        #region 事件
        public event Action OnMeasureStart;
        public event Action<string> OnBarcodeChanged;
        public event Action<IShapeElement> OnElementUpdated;
        #endregion

        public override void Open()
        {
            InitialSetting();

            base.Open();
        }

        private void InitialSetting()
        {
            Config.SnapshotPointCollection.ForEach(u =>
            {
                u.GetHalconToolPathList().ForEach(path =>
                {
                    LoadHalconTool(path, u.Id);
                });
            });

            Config.KeyUnitCollection.ForEach(u =>
            {
                if (!u.IsEnabled)
                    return;

                var snapshotPoint = Config.SnapshotPointCollection.FirstOrDefault(s => s.Id == u.SnapshotPointId && s.IsEnabled);
                if (snapshotPoint == null)
                    throw new ProcessException($"{u.AlignName}未设置可用拍照点位");

                if (u.ImageSeq < 1)
                    throw new ProcessException($"{u.AlignName}图片序号小于1");

                var algo = Config.KeyAlgorithemCollection.FirstOrDefault(a => a.Id == u.KeyAlgorithemId);
                if (algo == null)
                    throw new ProcessException($"{u.AlignName}未设置检测算法");

                u.KeyAlgorithemPath = algo.AlgorithemPath;
                LoadHalconTool(u.KeyAlgorithemPath, u.AlignName);

                var resultSet = Config.KeyResultCollection.FirstOrDefault(r => r.Id == u.KeyResultId);
                if (resultSet == null)
                    throw new ProcessException($"{u.AlignName}未设置检测结果配置");

                u.KeyResultList = new List<string>(resultSet.Results);
            });

            Config.MeasurementUnitCollection.ForEach(u =>
            {
                if (!u.IsEnabled)
                    return;

                var spec = Config.MeasureTypeCollection.FirstOrDefault(s => s.Code == u.MeasureType);
                if (spec == null)
                    throw new ProcessException($"{u.GetDisplayText()}未设置检测类型");

                u.Spec = new MeasureType();
                u.Spec.DataFrom(spec);

                LoadHalconTool(u.Spec.AlgorithemPath, u.Id);

                u.KeyUnitCollection.ForEach(b =>
                {
                    var keyRespone = Config.KeyUnitCollection.Where(ku => ku.IsEnabled && ku.Key == b.Key).ToList();
                    if (keyRespone.Count == 0)
                        throw new ProcessException($"{u.GetDisplayText()}对应的单键不存在或不可用");

                    if (b.KeyResult == "All")
                    {
                        keyRespone.SelectMany(kr => kr.KeyResultList).ToList().ForEach(r =>
                          {
                              b.MeasureValueDict[r] = null;
                          });
                    }
                    else
                    {
                        b.MeasureValueDict[b.KeyResult] = null;
                    }
                });
            });
        }

        #region InitialHalconTool
        //protected override void InitialHalconTool()
        //{
        //    base.InitialHalconTool();

        //    Config.SnapshotPointCollection.ForEach(u =>
        //    {
        //        u.GetHalconToolPathList().ForEach(path =>
        //        {
        //            if (!string.IsNullOrWhiteSpace(path))
        //            {
        //                string directoryPath = Path.GetDirectoryName(path);
        //                string fileName = Path.GetFileNameWithoutExtension(path);

        //                HDevEngineTool tool = new HDevEngineTool(directoryPath);
        //                tool.LoadProcedure(fileName);

        //                //使用“|”作为间隔符
        //                _halconToolDict[u.Id + "|" + path] = tool;
        //            }
        //        });
        //    });
        //}
        #endregion

        //Dictionary<string, ProductionMeasurement> MeasureDict = new Dictionary<string, ProductionMeasurement>();

        private string barCode = "";
        public string BarCode
        {
            get => barCode;
            set
            {
                if (barCode != value)
                {
                    barCode = value;
                    OnBarcodeChanged?.Invoke(value);
                }
            }
        }

        [ProcessMethod("", "StartJob", "开始扫描", InvokeType.TestInvoke)]
        public ProcessResponse StartJob(IOperationConfig opConfig, IDevice invokeDevice, IDevice sourceDevice)
        {
            if (string.IsNullOrWhiteSpace(BarCode))
            {
                throw new ProcessException("未输入产品条码，请勿开始测量");
            }

            OnMeasureStart?.BeginInvoke(null, null);

            var measurements = Config.MeasurementUnitCollection.Where(u => u.IsEnabled).ToList().DeepSerializeClone();
            measurements.ForEach(m =>
            {
                m.InitialKeyUnitMeasureChanged();
                //m.KeyUnitCollection.ForEach(k => k.InitialMeasureValueDictPropertyChanged());
            });

            //MeasureDict[BarCode] = new ProductionMeasurement()
            //{
            //    Barcode = BarCode,
            //    Measurements = measurements,
            //};

            //MeasureDict[BarCode].InitialMeasurementsPropertyChanged();
            //MeasureDict[BarCode].PropertyChanged += MeasureProduction_PropertyChanged;

            var pMeasure = new ProductionMeasurement()
            {
                Barcode = BarCode,
                Measurements = measurements,
            };

            pMeasure.InitialMeasurementsPropertyChanged();
            pMeasure.PropertyChanged += MeasureProduction_PropertyChanged;

            Config.SnapshotPointCollection.Where(u => u.IsEnabled).ToList().ForEach(s =>
                  {
                      IDevice device = DeviceCollection.FirstOrDefault(u => u.Id == s.MotionDevice);
                      if (device == null)
                          throw new ProcessException($"{s.Name}拍照点位未设置运动设备");

                      IMotion motionDevice = device as IMotion;

                      if (motionDevice == null)
                          throw new ProcessException($"{s.Name}拍照点位设置{device.Name}不是运动设备");

                      if (!motionDevice.MoveToPoint(null))
                      {
                          throw new ProcessException("运动中止", null, ExceptionLevel.Info);
                      }

                      CameraBase camera = DeviceCollection.FirstOrDefault(u => u.Id == s.CameraOp.Device) as CameraBase;
                      if (camera == null)
                          return;

                      ImageSet imgSet = camera.Snapshot(s.CameraOp.OpConfig);
                      if (imgSet == null)
                          return;

                      RunImageHandle(camera, s.CameraOp.OpConfig, imgSet, s.Id, s.Name, pMeasure.Measurements);
                  });

            BarCode = "";
            return new ProcessResponse(true);
        }

        private void MeasureProduction_PropertyChanged(object sender, PropertyChangedEventArgs e)
        {
            if (sender is ProductionMeasurement pMeasure)
            {
                //检查是否全部完成
                pMeasure.Measurements.ForEach(m =>
                {
                    if (m.KeyUnitCollection.All(k => k.IsDone != null))
                    {
                        if (!m.IsUpdated)
                        {
                            if (m.KeyUnitCollection.Any(k => k.IsDone == false))
                            {
                                m.Spec.ActualValue = -999;
                            }
                            else
                            {
                                string toolKey = m.Id + "|" + m.Spec.AlgorithemPath;
                                if (!_halconToolDict.ContainsKey(toolKey))
                                {
                                    LogAsync(DateTime.Now, $"{m.GetDisplayText()}{m.Spec.Code}算法未初始化", "");
                                    m.Spec.ActualValue = -999;
                                }
                                else
                                {
                                    var array = m.KeyUnitCollection.SelectMany(u => u.MeasureValueDict.Values.ToList().ConvertAll(v => v ?? -999)).ToArray();
                                    _halconToolDict[toolKey].InputTupleDic["INPUT_Params"] = new HTuple(array);
                                    if (!_halconToolDict[toolKey].RunProcedure(out string error))
                                    {
                                        LogAsync(DateTime.Now, $"{m.GetDisplayText()}{m.Spec.Code}算法异常,{error}", "");
                                        m.Spec.ActualValue = -999;
                                    }
                                    else
                                    {
                                        m.Spec.ActualValue = _halconToolDict[toolKey].GetResultTuple("OUTPUT_Result").D;
                                        LogAsync(DateTime.Now, $"{m.GetDisplayText()}数据{m.Spec.ActualValue}，结果{(m.Spec.MeasureResult == null ? "TBD" : (m.Spec.MeasureResult == true ? "OK" : "NG"))}", "");
                                    }
                                }
                            }

                            //输出图形基元到界面 todo
                            OnElementUpdated?.BeginInvoke(null, null, null);

                            m.IsUpdated = true;
                        }
                    }
                });

                if (!pMeasure.Measurements.All(m => m.IsUpdated))
                {
                    return;
                }

                //MES输出 todo

                //Excel报表输出 todo

                //数据库保存 todo

                //MeasureDict.Remove(pMeasure.Barcode);
                pMeasure.Dispose();
            }
        }

        private async void RunImageHandle(CameraBase camera, IOperationConfig opConfig, ImageSet imgSet, string snapshotId, string snapshotName, List<MeasurementUint> measureList)
        {
            await Task.Run(() =>
             {
                 var keys = Config.KeyUnitCollection.Where(u => u.IsEnabled && u.SnapshotPointId == snapshotId);
                 var keyBindCollection = measureList.SelectMany(u => u.KeyUnitCollection).Where(u => keys.Any(k => k.Key == u.Key)).ToList();

                 string toolKey = (opConfig as CameraOprerationConfigBase).AlgorithemPath;
                 HObject images = imgSet.HImage;

                 if (!string.IsNullOrWhiteSpace(toolKey))
                 {
                     toolKey = snapshotId + "|" + toolKey;
                     if (!_halconToolDict.ContainsKey(toolKey))
                     {
                         LogAsync(DateTime.Now, $"{snapshotName}未初始化取图算法配置", "");
                         keyBindCollection.ForEach(k => k.FillKeyValues(null));
                         return;
                     }

                     _halconToolDict[toolKey].InputImageDic["INPUT_Image"] = imgSet.HImage;
                     if (!_halconToolDict[toolKey].RunProcedure(out string error))
                     {
                         LogAsync(DateTime.Now, $"{snapshotName}取图算法异常，{error}", "");
                         keyBindCollection.ForEach(k => k.FillKeyValues(null));
                         return;
                     }

                     images = _halconToolDict[toolKey].GetResultObject("OUTPUT_Images");
                 }

                 HOperatorSet.CountObj(images, out HTuple count);

                 if (count == 0)
                 {
                     LogAsync(DateTime.Now, $"{snapshotName}取图算法未输出图像", "");
                     keyBindCollection.ForEach(k => k.FillKeyValues(null));
                     return;
                 }

                 var excludeKeys = keys.Where(u => u.ImageSeq > count).ToList();
                 if (excludeKeys.Count > 0)
                 {
                     LogAsync(DateTime.Now, $"{string.Join(" ", excludeKeys.Select(u => u.AlignName))}未在图片获取序列中", "");
                     keyBindCollection.Where(k => excludeKeys.Any(u => u.Key == k.Key)).ToList().ForEach(k =>
                          {
                              k.FillKeyValues(null);
                          });
                 }

                 Parallel.For(1, count.I, (i) =>
                 {
                     HOperatorSet.SelectObj(images, out HObject image, i);

                     keys.Where(u => u.ImageSeq == i).ToList().ForEach(k =>
                         {
                             Dictionary<string, double> resultDict = null;

                             var keyBindList = keyBindCollection.Where(u => u.Key == k.Key).ToList();

                             string keyToolKey = k.AlignName + "|" + k.KeyAlgorithemPath;
                             if (!_halconToolDict.ContainsKey(keyToolKey))
                             {
                                 LogAsync(DateTime.Now, $"{k.AlignName}检测算法未初始化", "");
                             }
                             else
                             {
                                 _halconToolDict[keyToolKey].InputImageDic["INPUT_Image"] = image;
                                 if (!_halconToolDict[keyToolKey].RunProcedure(out string error))
                                 {
                                     LogAsync(DateTime.Now, $"{k.AlignName}检测算法异常，{error}", "");
                                 }
                                 else
                                 {
                                     var results = _halconToolDict[keyToolKey].GetResultTuple("OUTPUT_Results").HTupleToDouble();
                                     if (results.Count == 0 || results.Any(u => u < 0))
                                     {
                                         LogAsync(DateTime.Now, $"{k.AlignName}检测结果异常", "");
                                     }
                                     else
                                     {
                                         resultDict = k.KeyResultList.ToDictionary(u => u, u =>
                                              {
                                                  int index = k.KeyResultList.IndexOf(u);
                                                  return results[index];
                                              });
                                     }
                                 }
                             }

                             keyBindList.ForEach(kb => kb.FillKeyValues(resultDict));
                         });

                     image.Dispose();
                 });

                 if (count.I != 1)
                     imgSet.HImage.Dispose();
             });
        }
    }
}

 src/Bro.M071.Process/packages.config

@@ -1,4 +1,5 @@
<?xml version="1.0" encoding="utf-8"?>
<packages>
  <package id="Autofac" version="4.9.4" targetFramework="net452" />
  <package id="Newtonsoft.Json" version="11.0.2" targetFramework="net452" />
</packages>

 src/Bro.Process/ProcessControl.cs

@@ -398,7 +398,7 @@
        #endregion

        #region Halcon算子设置
        private void InitialHalconTool()
        protected virtual void InitialHalconTool()
        {
            foreach (HDevEngineTool tool in _halconToolDict.Values)
            {
@@ -413,20 +413,25 @@
                {
                    toolPath.GetHalconToolPathList().ForEach(path =>
                    {
                        if (!string.IsNullOrWhiteSpace(path))
                        LoadHalconTool(path, monitorSet.Id);
                    });
                }
            });
        }

        protected void LoadHalconTool(string algorithemPath, string prefix)
                        {
                            string directoryPath = Path.GetDirectoryName(path);
                            string fileName = Path.GetFileNameWithoutExtension(path);
            if (!string.IsNullOrWhiteSpace(algorithemPath))
            {
                string directoryPath = Path.GetDirectoryName(algorithemPath);
                string fileName = Path.GetFileNameWithoutExtension(algorithemPath);

                            HDevEngineTool tool = new HDevEngineTool(directoryPath);
                            tool.LoadProcedure(fileName);

                            //使用“|”作为间隔符
                            _halconToolDict[monitorSet.Id + "|" + path] = tool;
                _halconToolDict[prefix + "|" + algorithemPath] = tool;
                        }
                    });
                }
            });
        }

        /// <summary>

 src/Bro.UI.Config/Ctrls/CtrlMethodInvoke.Designer.cs

@@ -82,9 +82,9 @@
            | System.Windows.Forms.AnchorStyles.Left) 
            | System.Windows.Forms.AnchorStyles.Right)));
            this.tableLayoutPanel1.SetColumnSpan(this.propOpConfig, 4);
            this.propOpConfig.Location = new System.Drawing.Point(23, 65);
            this.propOpConfig.Location = new System.Drawing.Point(23, 64);
            this.propOpConfig.Name = "propOpConfig";
            this.propOpConfig.Size = new System.Drawing.Size(553, 359);
            this.propOpConfig.Size = new System.Drawing.Size(553, 360);
            this.propOpConfig.TabIndex = 15;
            this.propOpConfig.ToolbarVisible = false;
            // 
@@ -111,7 +111,8 @@
            // btnInvoke
            // 
            this.btnInvoke.Anchor = ((System.Windows.Forms.AnchorStyles)((System.Windows.Forms.AnchorStyles.Top | System.Windows.Forms.AnchorStyles.Right)));
            this.btnInvoke.Location = new System.Drawing.Point(501, 36);
            this.btnInvoke.Location = new System.Drawing.Point(501, 35);
            this.btnInvoke.Margin = new System.Windows.Forms.Padding(3, 2, 3, 3);
            this.btnInvoke.Name = "btnInvoke";
            this.btnInvoke.Size = new System.Drawing.Size(75, 23);
            this.btnInvoke.TabIndex = 19;
@@ -129,13 +130,13 @@
            this.tableLayoutPanel1.ColumnStyles.Add(new System.Windows.Forms.ColumnStyle());
            this.tableLayoutPanel1.ColumnStyles.Add(new System.Windows.Forms.ColumnStyle(System.Windows.Forms.SizeType.Absolute, 20F));
            this.tableLayoutPanel1.Controls.Add(this.propOpConfig, 1, 3);
            this.tableLayoutPanel1.Controls.Add(this.btnInvoke, 4, 2);
            this.tableLayoutPanel1.Controls.Add(this.cboTestMethod, 3, 2);
            this.tableLayoutPanel1.Controls.Add(this.cboTestExecuteDevice, 2, 2);
            this.tableLayoutPanel1.Controls.Add(this.cboTestSourceDevices, 1, 2);
            this.tableLayoutPanel1.Controls.Add(this.label8, 2, 1);
            this.tableLayoutPanel1.Controls.Add(this.label5, 1, 1);
            this.tableLayoutPanel1.Controls.Add(this.label2, 3, 1);
            this.tableLayoutPanel1.Controls.Add(this.btnInvoke, 4, 2);
            this.tableLayoutPanel1.Dock = System.Windows.Forms.DockStyle.Fill;
            this.tableLayoutPanel1.Location = new System.Drawing.Point(0, 0);
            this.tableLayoutPanel1.Margin = new System.Windows.Forms.Padding(20);

 src/Bro.UI.Model.Winform/Helper/MenuFormFactory.cs

@@ -21,6 +21,9 @@
                    var assm = new DirectoryInfo(AppDomain.CurrentDomain.BaseDirectory).GetFiles(DLLPATTERN).Select(u => Assembly.LoadFrom(u.FullName)).ToList();
                    assm.AddRange(AppDomain.CurrentDomain.GetAssemblies());
                    assm = assm.Distinct().ToList();

                    //var types = assm.SelectMany(a => a.GetTypes());

                    menuFrmTypeDict = assm.SelectMany(a => a.GetTypes())
                                .Where(t =>
                                {